12 Cleaning and care
The spin dryer has a brake system, which decreases the rotation
of the drum in a very short time after moving the lever to OFF position.
Important!
A special safety device prevents the lid from opening until the drum is
completely stopped.
Caution!
Do not try to open the lid by force. There is risk to damage the spin dryer.
The laundry may still be a bit damp to the touch. They will not result to be
entirely dry, this is normal. So, it is advisable to lay them for a short period of
time over a traditional drying rack, before treating them with an iron.
When the appliance is switched off with the lever at OFF position, the lid will not
be completely closed, this is normal.
Warning!
Always unplug the spin dryer before performing any kind of cleaning and
maintenance to the appliance.
• Clean the drum with a dry soft cloth once finished the last spin drying cycle.
• If the water comes out dirty in a spin drying cycle, it will be necessary to clean
the drum with a wet soft cloth, in order to avoid that the next laundry load of
the spin dryer, gets dirty too.
• To clean the drum and the external surfaces use a damp soft cloth with soft
detergents.
• Do not use neither abrasive products nor solvents to clean both internal and
external surfaces.
• Store the spin dryer in a dry and clean place.
• Roll the mains cable around the cover and fasten it in the cable storage
fixture, that is located
in the back of this part.
Cleaning and care
