English
47
Using the remote control
Loading a CD/DVD
Understanding the
onscreen CD-menu
Understanding the
onscreen DVD-menu
Playing media
You transmit commands to the DVD-Player via remote control. It is thus
important to point the end of the remote control towards the DVD-
Player.
1. Press the remote control button OPEN/CLOSE (Fig. 3/1). The CD/DVD
tray opens.
2. Place the CD/DVD on the tray.
3. Press the remote control button OPEN/CLOSE (Fig. 3/1) again. The
CD/DVD tray closes. The display (Fig. 1/3) rst shows „LOAd“. After a
short while the type of the loaded medium is displayed (e.g. „DVD“).
When playing CDs the following status information is displayed on screen:
Media type (1), e.g. “CD”.
Current track/total number of tracks (2).
Audio output (3): If the MUTE-button (Fig. 3/37) on the remote
control was pressed, the audio output is prevented. The word „Mute“
appears on the screen.
Repeat (4):
„x“: no repeat.
„1“: the current track is repeated.
„A“: all tracks are repeated.
Specify the repeat with the REPEAT-button.
Time (5): This provides information about the duration and the re-
maining play time. By standard the play time expired of the current
track is displayed. The display is in hours, minutes and seconds. Press
the DISPLAY button (Fig. 3/4) once or several times to have further
times displayed.
The following possibilities are available for selection
time remaining to the end of the track,
expired playing time of the CD,
time remaining to the end of the CD.
When playing DVDs you can view the on-screen menu by pressing the
DISPLAY button (Fig. 3/4).
DVD-menu page 1
Current title/total number of titles (1).
Current chapter/total number of chapters (2).
Time (3): This provides information about the duration and the re-
maining play time. By standard the play time expired of the current
title is displayed. The display is in hours, minutes and seconds. Press
the DISPLAY button (Fig. 3/4) once or several times to have further
times displayed.
