648364
27
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
OPERATING INSTRUCTIONS
Using the product
27
ENGLISH
Press “+” button to enter the first hour to see/modify. Press “M” button to choose the wished temperature
level among Comfort, Eco or Frost Free:
The displayed temperature once you’ve selected a
specific hour of the day, is the one currently set on
the P1 Program.
Use “+” and “-“ buttons to enter each hour of day
1 and see/modify the working temperature of each
of them.
The hour displayed always indicates the starting
point. For example: when H 23 is displayed the mo-
dification involves the period of time between 23:00
and 00:00.
Having modified the temperature for each of the 23
hours of Day 1, press further “+” button to enter the
modification mode of Day 2.
Press “+” button to diplay/modify the working tem-
perature of each hour of Day 2, as descrive for Day 1.
You can set automatically the same program of Day
1 on Day 2 by holding the “F” button and pressing
+” button.
Note: you are allowed to copy and paste the same
daily program ONLY WHEN the number of the day you
wish to adjust is displayed (as showed in the picture),
BUT NOT when the hour is displayed.
Once the last day (Day 7) has been set, press “+
button to end the program sequence.
END will appear on the display. A further pression
of “+” button will allow you to confirm the adjusted
program.
“OK“ will appear on the display for 5 second, confir-
ming that the Program sequence has been carried
out successfully.
System is now set to adjust the temperature according
to the new adjustment of program P1.
Note: it is possible to exit any time from the program
sequence, without displaying every hour until Day 7.
To do so, just hold “F” button and press “-“ button.
N.B.:
- You can abort the display/modification sequence anytime, deleting any settings that have not been saved, just by pressing
“Stand-By” button;
- Restoring the default settings will delete every P1 Program previously created (see paragraph 6.3);
- If no button is pressed within 90 sec. during the Program setting process, the result will be the cancellation of the display/modi-
fication procedure and will restore back the factory default settings;
- During the programmation process, the heating elements will automatically switch to Stand-by mode, and the radiator does not
heat.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG DKE 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG DKE 200 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info