English
52
Selecting track directly
Repeating DVD-title/chapter
Repeating track on CD
Repeating CD
Stopping repeat
Selecting a section
to be repeated
Using the DVD-menu
Using fast forward or reverse
Enter the number of the desired chapter/track with the Numerical But-
tons on the remote control (Fig. 2/26). For chapters/tracks over 9 please
select the desired tens gure by pressing the +10 (Fig. 2/3) button.
Replay of the chapter/track starts after a short while.
1. Choose the chapter or title to be repeated.
2. Press the REPEAT-button (Fig. 2/17). The message “REP: [CHAPTER]”
appears on the screen.
3. Press the REPEAT-button again, until the message “REP: [TITLE]” or
“REP: [ALL]” is displayed.
1. Select the track to be repeated.
2. Press the REPEAT-button (Fig. 2/17). The message “REP: [REP 1]“
appears on the screen.
Keep pressing the REPEAT-button (Fig. 2/17), until the message “REP:
[ALL]“ is displayed on screen.
Press the REPEAT button (Fig. 2/17) repeatedly until the words “REP:
[OFF]“ appear.
You can dene a freely selected section to be automatically repeated.
To do this, proceed as follows:
1. Mark the beginning of the section to be repeated. During repetition
press the button A-B (Fig. 2/27) on the remote control once. The
message “REPEAT A-” appears on the screen.
2. Mark the end of the section to be repeated by pressing the A-B
button on the remote control once again. The message “REPEAT
A-B“ appears on the screen. The previously marked section is now
repeated.
Press the A-B-button again to stop the repetition.
NOTE:
On MP3 CDs the section to be repeated must be within a track.
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specic for the DVD and can thus not be
explained in detail.
Press the MENU-button (Fig. 2/6) to access the DVD-menu. Use the Cur-
sor Buttons (Fig. 2/9) to navigate in the Menu. Press the ENTER-button
(Fig. 2/22) to conrm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the Numerical Buttons (Fig. 2/26) on the
remote control.
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the (Fig. 2/15) or button (Fig. 2/16) to start fast for-
ward or fast reverse. The current replay direction and the speed, e.g.
“ x 2“ is now displayed on screen.
2. Press the or , button several times in order to change the
speed. The speed can be accelerated by factor 2, 4, 8, or 20.