28801
45
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
RESET FUNCTION
RESET button (24) must be activated
with either a ballpoint pen or thin metal
object.
The RESET button is to be activated for
the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (24), the unit
can't work yet, please use a cotton swab
socked in isopropyl alcohol to clean the
socket on the front panel.
OPERATION
FM1 FM2 FM3
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MOD button (6) shortly to select
radio mode, the radio mode appears
in the display together with the
memory band an frequency.
SELECTING THE FREQUENCY BAND
At radio mode, press BND/LOU button
(13) shortly to select the desired band.
The reception band will change in the
following order:
SELECTING STATION
Press button(17) or button
(16) shortly to activate automatic
seek function. Press for several
seconds until "MANUAL" appears on
the display, the manual tuning mode
is selected. If both buttons have not
been pressed for several seconds,
they will return to seek turning mode
and "AUTO" appears on the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AMS button (18) for several
seconds, the radio searches from
the current frequency and checks
the signal strength until one cycle
search is finished, And then 6
strongest stations are stored into
the corresponding preset number
button.
- Program scanning
Press AMS button (18) shortly to
scan preset station, When the
field strength level is more than
the threshold level of stop level,
the radio is holding at that preset
number for several seconds with
release mute, then searches
again.
STATION STORING
Press any one of the preset buttons
(14) (1 to 6) to select a station,
which had been stored in the
memory. Press this button for
several seconds (until 2ND beeps
come out), current station is stored
into the number button.
RDS (RADIO DATA SYSTEM)
OPERATION
- Setting RDS mode
Press AF button (3) and release
immediately to switch on or off
RDS mode.
Whenever RDS is switch on,
symbol “AF” appears on the
display.
Program name is displayed on
receiving a RDS station.
AF” starts blinking if the
broadcasting signal getting worse.
ALARM” will be displayed when
an emergency broadcasting is
received, meanwhile sound output
level will be adjusted to the preset
output level automatically when
the volume control is set at
minimum.
- Regional Program Operation
Press AF button (3) for several
seconds to switch on or off region
mode.
Some broadcasting stations
change their program from normal
broadcasting to regional
11
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG CSFMP200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG CSFMP200 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info