21440
34
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
GB
D
F
I
E
P
NL
DK
S
FIN
TR
RUS
BBS 1100
BBSE 1100
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlight at læse og
opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
Kullanøm kølavuzu
Lütfen okuyun ve saklayin
Èíñòðóêöèÿ ïî
èñïîëüçîâàíèþ
Ïîæàëóéñòà, ïðî÷òèòå è
ñîõðàíèòå íàñòîÿùóþ
èíñòðóêöèþ
1
ENGLISH
BBS 1100, BBSE 1100
You have high standards and expect to purchase quality goods – quality offered by
AEG.
We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an AEG Electric Power Tool was the right choice!
BBS 1100 BBSE 1100
Nominal power 1100 W 1100 W. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt speed no load 400 m/min 230–400 m/min. . . . . . . . . . . . . . . . . . .
Sanding width 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt length 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sanding surface 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . . . . . .
Weight 5,0 kg 5,0 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J Please pay attention to the safety instructions in the attached leaflet!
J Dust that arises when working in wood or using the tool on industrial material can be
dangerous to health. In this case connect the tool to a suction device.
J Appliances used at many different locations including open air must be connected
via a current surge preventing switch.
J Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
J Sawdust and splinters must not be removed while the machine is running.
J Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
J Always disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
J Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
J When sanding metal the dust suction facility should not be used, because of the risk
of fire from flying sparks.
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 88 dB (A)
Sound power level = 101 dB (A).
Wear ear protectors! Measured values determined according to EN 50 144.
Typically the hand-arm vibration is below 2.5 m/s
2
.
Measured values determined according to EN 50 144.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
The belt sander can be used for sanding wood, plastics and metal.
Do not use this product in another way as stated for normal use.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Mains
connection
Use
2
ENGLISH
BBS 1100, BBSE 1100
Always disconnect the plug from the
socket before carrying out any work on the
machine.
Prior the changing belt, adjust sanding belt
by turning the belt adjusting screw approx.
2–3 cm in the direction of the open side of
the machine beyond the rollers, whilst the
machine is running, as the new sanding
belt can sometimes brush against the
machine housing.
1. Pull the clamping lever forwards
2. Remove the worn belt and fit the inside of
the belt is pointing in the same direction as
the arrow on the machine.
3. Push the clamping lever back again
4. Taking a test run, position the sanding belt
with the aid of the belt adjusting screw so
that it is flush with the outer edge of the
sanding belt support.
The speed is adjusted by means of the
electronic thumb wheel.
1 = lowest speed
6 = highest speed
Brief description
Modifications: Text, diagrams and data are correct
at the time of printing. In the interest of continuous
improvement of our products, technical
specifications are subject to alteration without prior
notice.
Integrated dust removal
Locking button
On-/off switch
Suction connector
Adjusting screw for
belt
Dust bag
Electronic thumb wheel (only applicable for BBSE 1100)
Changing the
belt
Setting speed of
rotation
(only applicable
for
BBSE 1100
3
ENGLISH
BBS 1100, BBSE 1100
Intermittent use
Switching on: Press On-/off switch
Switching off: Release On-/off switch
Continuous use
Switching on: Press the On-/off switch and
then the locking button, after that release
on-off switch.
Switching off: Press the On-/off switch and
then release.
Always hold machine firmly with both hand
prior to switching on. Only switch on in
raised position.
When sanding, guide the machine without applying special pressure. The weight of
the machine itself is quite sufficent for good sanding results.
When sanding wood, the dust bag should
be used.
When suction performance becomes less
effective empty dust bag.
If large quantities of dust are being
produced, a hose-pipe can be connected
to the dustbag connector.
When sanding metal the dust suction
facility should not be used, because of the
risk of fire from flying sparks.
The ventilation slots of the machine must be kept clear at all times.
Use only AEG accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our AEG service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the ten–digit
No. as well as the machine type printed on the label and order the drawing at your
local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Strasse 10,
D-71364 Winnenden, Germany.
The range of accessories with part numbers is shown in our catalogue.
Switching the
machine on and
off
Advice for
operation
Dust extraction
Maintenance
Accessories
1
2
4
DEUTSCH
BBS 1100, BBSE 1100
Sie sind anspruchsvoll und erwarten Qualität, die Ihnen AEG bietet.
Für Sie haben wir ein haltbares und möglichst sicheres Elektrowerkzeug gebaut.
Bitte lesen Sie vor Inbetriebnahme Ihres Gerätes die Gebrauchsanleitung, um Ihr
Elektrowerkzeug effektiv und gefahrlos nutzen zu können.
Wir sind sicher, daß Sie mit AEG-Elektrowerkzeugen Ihre richtige Wahl getroffen
haben.
BBS 1100 BBSE 1100
Nennaufnahme 1100 W 1100 W. . . . . . . . . . . . . . . . . . . . . . . . . . .
Bandgeschwindigkeit Leerlauf 400 m/min 230–400 m/min. . . . . . . . .
Schleifbreite 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bandlänge 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Schleiffläche 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . . . . . . . . .
Gewicht 5,0 kg 5,0 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J Sicherheitshinweise der beiliegenden Broschüre beachten!
J Bei längerem Bearbeiten von Holz oder bei gewerblichem Einsatz für Materialien, bei
denen gesundheitsgefährdende Stäube entstehen, ist das Elektrowerkzeug an eine
geeignete Absaugvorrichtung anzuschließen. (In Deutschland werden für Holzstäube
aufgrund TRGS 553 geprüfte Absaugeinrichtungen gefordert).
Für andere Materialien muß der gewerbliche Betreiber die speziellen Anforderungen
mit der zuständigen Berufsgenossenschaft klären.
J Steckdosen in Außenbereichen müssen mit Fehlerstrom-Schutzschaltern
ausgerüstet sein. Das verlangt die Installationsvorschrift für Ihre Elektroanlage. Bitte
beachten Sie das bei der Verwendung unseres Gerätes – sprechen Sie mit Ihrem
Elektroinstallateur.
J Beim Arbeiten mit der Maschine stets Schutzbrille tragen. Schutzhandschuhe, festes
und rutschsicheres Schuhwerk und Schürze werden empfohlen.
J Späne oder Splitter dürfen bei laufender Maschine nicht entfernt werden.
J Gehäuse der Maschine nicht anbohren, da sonst die Schutzisolierung unterbrochen
wird (Klebeschilder verwenden).
J Vor allen Arbeiten an der Maschine Stecker aus der Steckdose ziehen.
Maschine nur ausgeschaltet an die Steckdose anschließen.
J Anschlußkabel stets vom Wirkungsbereich der Maschine fernhalten. Kabel immer
nach hinten von der Maschine wegführen.
J Beim Schleifen von Metall wegen Brandgefahr durch Funkenflug keine
Staubabsaugung verwenden.
Der A-bewertete Geräuschpegel des Gerätes beträgt typischerweise:
Schalldruckpegel = 88 dB (A)
Schalleistungspegel = 101 dB (A).
Gehörschutz tragen! Meßwerte ermittelt entsprechend EN 50 144.
Die Hand-Arm Vibration ist typischerweise niedriger als 2,5 m/s
2
.
Meßwerte ermittelt entsprechend EN 50 144.
Nur an Einphasen-Wechselstrom und nur an die auf dem Leistungsschild
angegebene Netzspannung anschließen. Anschluß ist auch an Steckdosen ohne
Schutzkontakt möglich, da eine Schutzisolierung nach DIN 57 740/ VDE 0740 bzw.
CEE 20 vorliegt. Die Funkentstörung entspricht der Europanorm EN 55014.
Der Bandschleifer ist geeignet zum Flächenschleifen von Holz, Kunststoff und Metall.
Dieses Gerät darf nur wie angegeben bestimmungsgemäß verwendet werden.
Vorwort
Technische
Daten
Hinweise für
Ihre Sicherheit
Geräusch-
meßwerte
Vibrations-
meßwerte
Netzanschluß
Verwendung
5
DEUTSCH
BBS 1100, BBSE 1100
Vor allen Arbeiten an der Maschine
Stecker aus der Steckdose ziehen.
Vor dem Schleifbandwechsel das
Schleifband etwas zur offenen
Maschinenseite hin verstellen, da das
neue Schleifband unter Umständen am
Maschinengehäuse streifen kann; hierzu
Bandjustierschraube bei laufender
Maschine nach rechts drehen.
1. Entspannhebel nach vorn ziehen.
2. Verbrauchtes Band entnehmen und neues
Band aufziehen. Darauf achten, daß die
Pfeilrichtung auf der Inneseite des Bandes
mit dem Pfeil auf der Maschine
übereinstimmt.
3. Entspannhebel wieder einklappen.
4. Maschine einschalten und das Schleifband
mit der Bandjustierschraube so ausrichten,
das es mit der äußeren Kante der
Schleifbandauflage abschließt.
Die Drehzahl mit dem Elektronik-Stellrad
einstellen.
1 = kleinste Drehzahl
6 = größte Drehzahl
Kurzbeschreibung
Änderungen: Text, Bild und Daten entsprechen dem technischen
Stand zur Zeit des Drucktermins. Änderungen im Sinne der
Weiterentwicklung unserer Produkte sind vorbehalten.
Integrierte Staubabsaugung
Arretierknopf für Schalterdrücker
Schalterdrücker
Absaugstutzen
Justierschraube für
Bandlauf
Staubsack
Stellrad Drehzahl (nur bei BBSE 1100)
Schleifband
wechseln
Drehzahl
einstellen
(nur bei
BBSE 1100
6
DEUTSCH
BBS 1100, BBSE 1100
Momentschaltung
Einschalten: Ein-/Ausschalter drücken.
Ausschalten: Ein-/Ausschalter loslassen.
Dauerschaltung
Einschalten: Ein-/Ausschalter drücken und
dann Arretierknopf drücken,
Ein-/Ausschalter loslassen.
Ausschalten: Ein-/Ausschalter drücken
und loslassen.
Maschine schon vor dem Einschalten fest
mit beiden Händen festhalten.
Einschalten nur in abgehobener Position.
Maschine beim Schleifen ohne Druck führen. Das Eigengewicht der Maschine
genügt für gute Schleifergebnisse.
Zum Schleifen von Holz den Staubsack
verwenden.
Bei nachlassender Saugleistung den
Staubsack entleeren.
Bei großen Staubmengen kann an den
Absaugstutzen auch ein Saugschlauch
angeschlossen werden.
Beim Schleifen von Metall wegen
Brandgefahr durch Funkenflug keine
Staubabsaugung verwenden.
Stets die Lüftungsschlitze der Maschine sauber halten.
Nur AEG Zubehör und Ersatzteile verwenden. Bauteile, deren Austausch nicht
beschrieben wurde, bei einer AEG Kundendienststelle auswechseln lassen
(Broschüre Garantie/Kundendienstadressen beachten).
Bei Bedarf kann eine Explosionszeichnung des Gerätes unter Angabe der
Maschinen Type und der zehnstelligen Nummer auf dem Leistungsschild bei Ihrer
Kundendienststelle oder direkt bei AEG Elektrowerkzeuge, Max-Eyth-Strasse 10,
D-71364 Winnenden, Germany angefordert werden.
Das Zubehör mit Bestellnummern ersehen Sie bitte aus unseren Katalogen.
Ein-/Ausschalten
Arbeitshinweise
Staubabsaugung
Wartung
Zubehör
1
2
7
FRANÇAIS
BBS 1100, BBSE 1100
Vous avez des exigences et vous voulez de la qualité – une qualité que vous offre
AEG.
Nous avons mis au point pour vous un outil électrique de longue durée vous offrant
un maximum de sécurité. Avant la mise en service de votre appareil, veuillez lire
attentivement le mode d’emploi afin d’en tirer le plus d’efficacité et d’éviter tout risque
de danger.
Nous sommes convaincus qu’avec les outils électriques AEG vous avec fait le choix
qu’il fallait.
BBS 1100 BBSE 1100
Puissance absorbée 1100 W 1100 W. . . . . . . . . . . . . . . . . . . . . . .
Vitesse de bande à vide 400 m/min 230–400 m/min. . . . . . . . . . . . . .
Largeur de la bande 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . .
Longueur de la bande 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . .
Surface de ponçage 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . .
Poids 5,0 kg 5,0 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J Respecter les instructions de sécurité se trouvant dans le prospectus ci-joint.
J Lors de travaux de ponçage de longue durée, bois ou autres matériaux dégageant
des poussières nocives pour la santé, la machine est à raccorder à un appareil
d’aspiration.
J Les prises de courant se trouvant à l’extérieur doivent être équipées de disjoncteurs
de protection, répondant ainsi à la prescription de mise en place de votre installation
électrique. Veuillez, d’une part, en tenir compte lors de l’utilisation de notre appareil
et d’autre part, en parler à votre électricien.
J Toujours porter des lunettes protectrices lorsqu’on travaille avec la machine. Des
gants de sécurité et un masque de protection sont recommandés.
J Ne jamais enlever les copeaux ni les éclats lorsque la machine est en marche.
J Ne pas percer le carter de la machine; ceci pourrait entraîner une détérioration de
l’isolation de protection (utiliser des autocollants).
J Avant tous travaux sur la machine extraire la fiche de la prise de courant.
Ne raccorder la machine au réseau que si l’interrupteur est en position arrêt.
J Le câble d’alimentation doit toujours se trouver en dehors du champ d’action de la
machine. Toujours maintenir le câble d’alimentation à l’arrière de la machine.
J En raison des risques d’incendie, il est déconseilléd’avoir recours au sysréme
d’aspiration pour le ponçage des métaux.
Les mesures réelles (A) des niveaux de bruit de la machine sont:
Intensité de bruit = 88 dB (A)
Niveau de bruit = 101 dB (A).
Toujours porter des casques protecteurs! Valeurs de mesures obtenues
conformément à la norme européenne 50 144.
La vibration de l’avant–bras est en–dessous de 2,5 m/s
2
.
Valeurs de mesures obtenues conformément à la norme européenne 50 144.
Nos machines fonctionnent uniquement sur courant alternatif monophasé. S’assurer
que la tension du réseau correspond effectivement à celle indiquée sur la plaque
signalétique de la machine. Le branchement sur une prise de courant sans mise à
terre est possible du fait de la double isolation selon normes DIN 57 740/VDE 0740
et CEE 20. Antiparasitage selon normes européennes EN 55014.
La ponceuse a bande peut-être utilisée pour poncer le bois, les plastiques et le
métal.
Comme déjà indiqué, cette machine n’est conçue que pour une utilisation normale.
Introduction
Caractéristiques
techniques
Conseils de
sécurité
Mesure de bruit
Valeur de
vibration
mesurée
Branchement
secteur
Utilisation
8
FRANÇAIS
BBS 1100, BBSE 1100
Avant tous travaux sur la machine extraire
la fiche de la prise de courant.
Mettre la machine en route. Tourner la vis
d’ajustage vers la droite et faire glisser la
bande vers l’extérieur d’environ 2à 3cm.
Arrêter la machine.
1. Tirer le lever vers l’avant.
2. Enlever la bande et la remplacer. Veiller à
faire corresspondre le sens des flèches qui
se trouvent sur la bande et sur la machine.
3. Repousser le lever.
4. Mettre en route et positionner la bande au
moyen de la vis.
La vitesse se règle au moyen de la
molette.
1 = Vitesse réduite
6 = Vitesse élevée
Description
Modifications: Les textes, les illustrations et les données
techniques correspondent à la situation au moment de l’impression.
Toutes modifications techniques sont réservées dans le cadre du
développement technique permanent.
Aspiration intégrée de la poussière
Bouton de blocage
Interrupteur
Manchon d’aspiration
Vis de réglage de la
bande (centrage)
Sac à poussières
Molette de réglage de la vitesse électronique
(potentiomètre) (uniquement sur BBSE 1100)
Remplacement
de la bande
Reglage de la
vitesse
(uniquement sur
BBSE 1100
9
FRANÇAIS
BBS 1100, BBSE 1100
Marche momentanée
Mise en marche: appuyer sur l’interrupteur
Marche/Arrêt
Arrêt: lâcher l’interrupteur Marche/Arrêt
Marche continue
Mise en marche: appuyer d’abord sur
l’interrupteur marche/arrêt puis sur le
bouton de blocage, lâcher l’interrupteur
marche/arrêt.
Arrêt: appuyer sur l’interrupteur
marche/arrêt et lâcher.
Avant la mise en route, maintenir la
machine en l’air avec les deux mains.
Il n’est pas nécessaire, lors du ponçage, d’exercer une pression particulière sur la
machine, son propre poids suffit.
Pour le poncage du bois, utiliser le sac à
poussières.
Si le rendement de l’aspiration baisse,
vider le sac.
Si le volume de poussières est
particulièrement important, un aspirateur
peut être raccordé sur la buse d’aspiration.
En raison des risques d’incendie, il est
déconseilléd’avoir recours au sysréme
d’aspiration pour le ponçage des métaux.
Tenir toujours propre les orifices de ventilation de la partie moteur.
N’utiliser que des pièces et accessoires AEG. Pour des pièces dont l’échange n’est
pas décrit, s’adresser de préférence aux stations de service après-vente AEG (voir
brochure Garantie/Adresses des stations de service après-vente).
Si besoin est, une vue éclatée de l’appareil peut être fournie. S’adresser, en
indiquant bien le numéro à dix chiffres porté sur la plaque signalétique, à votre
station de service après–vente (voir liste jointe) ou directement à AEG
Elektrowerkzeuge, Max-Eyth-Strasse 10, D-71364 Winnenden, Germany.
Consulter nos catalogues qui vous renseignent sur notre programme d’accessoires
avec leur référence.
Mise en
marche/arrêt
Conseils
pratiques
Aspiration de la
poussière
Entretien
Accessoires
1
2
10
ITALIANO
BBS 1100, BBSE 1100
La vostra richiesta ed aspettativa è quella di acquistare merce d’elevata qualità -
qualità offerta da AEG.
Noi costruiamo per voi utensili elettrici durevoli e affidabili.
Si prega di leggere attentamente le istruzione al primo utilizzo cosicché si possa
utilzzare l’utensile elettrico in modo più sicuro e corretto.
Siamo sicuri che acquistare gli utensili elettrici AEG sia la scelta migliore.
BBS 1100 BBSE 1100
Potenza assorbita 1100 W 1100 W. . . . . . . . . . . . . . . . . . . . . . . . .
Velocità a vuoto 400 m/min 230–400 m/min. . . . . . . . . . . . . . . . . . . . .
Larghezza levigatura 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . .
Lunghezza nastro 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensioni levigtura 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . .
Peso 5,0 kg 5,0 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J Si prega di leggere con attenzione le istruzioni riguardanti la sicurezza, nel volantino
allegato.
J Per lunghe lavorazioni nel legno o con altri materiali che producono poveri dannose
alla salute, e’ prescritto l’utilizzo sull’utensile dell’aspirazione polvere.
J Gli apparecchi mobili usati all’aperto devono essere collegati interponendo un
interruttore di sicurezza per guasti di corrente.
J Durante l’uso dell’apparecchio utilizzare sempre gli occhiali di protezione. Inoltre si
consiglia di usare sistemi di protezione per la respirazione e per l’udito, oltre ai guanti
di protezione.
J Non rimuovere trucioli o schegge mentre l’utensile è in funzione.
J Evitare di forare la carcassa dell’utensile per non danneggiare l’isolamento.
(Utilizzare placchette adesive).
J Prima di effettuare qualsiasi lavoro sulla macchina togliere la spina dalla presa di
corrente.
Inserire la spina solo con interruttore su posizione “OFF”.
J Tenere sempre lontano il cavo di collegamento dall’area di lavoro dell’attrezzo.
J Per levigatura di metallo non aspirare la polvere causa scintille e pericolo di incendio.
La misurazione A del livello di rumorosità di un utensile è di solito:
Livello di rumorosità = 88 dB (A)
Potenza della rumorosità = 101 dB (A).
Utilizzare le protezioni per l’udito! Valori misurati conformemente alla norma
EN 50 144.
Le vibrazioni sull’elemento mano-braccio di solito sono inferiori a 2.5 m/s
2
.
Valori misurati conformemente alla norma EN 50 144.
Alimentazione dell’utensile: corrente alternata monofase. Importante: la tensione
della rete deve corrispondere a quella riportata sulla targhetta dell’utensile. Il
collegamento é possibile anche con prese non munite di contatto di protezione: é
previsto infatti un isolamento di protezione conforme a norme DIN 57740/VDE 0740
(CEE 20). La schermatura contro i radiodisturbi é conforme alla norma
europea EN 55014.
La levigatrice a nastro è adatta per trattare superfici piane di legno, plastica e
metallo.
Utilizzare il prodotto solo per l’uso per cui è previsto.
Premessa
Dati tecnici
Norme di
sicurezza
Livello di
rumorosità
Livello di
vibrazione
Collegamento
alla rete
Possibilità’ di
utilizzo
11
ITALIANO
BBS 1100, BBSE 1100
Prima di effettuare qualsiasi lavoro sulla
macchina togliere la spina dalla presa di
corrente.
Per evitare che il nuovo nastro tocchi
carcassa della levigatrice, girare verso
destra la vite con apparecchio funzionante,
fare sporgere il nastro da sosituire ca. 2-3
cm oltre i rulli e verso il lato esterno
dell’apparecchio.
1. Tirare la leva in avanti, togliere il nastro da
sostituire e montare quello nuova.
2. Fare attenzione che la direzione della
freccia sul lato interno del nastro sia rivolta
nella stessa direzione di quella sulla
levigatrice.
3. Fare ritornare la leva nella posizione
orginale.
4. Con qualche giro di prova e attraverso la
vite di aggiustaggio portare il nastro in
positione da formare linea unica con il lato
esterno dell’appoggio nastro.
La velocità viene regolata attraverso la
rondella elettronica
1= bassa potenza
6= alta potenza
Breve indicazione
Modifiche: Testo, figure e dati corrispondono allo standard tecnico
aggiornato all’epoca della stampa. Ci riserviamo pertanto eventuali
modifiche tecniche dovute all’ulteriore sviluppo dei nostri prodotti.
Aspirazione integrata
Blocco interruttore
Interruttore
Attacco aspirazione
Vite aggiustaggio
nasto
Sacchetto
raccoglipolvere
Regolatore elettronico (solo per BBSE 1100)
Sostituzione
nastro
Impostare il
numero di giri
(solo per
BBSE 1100
12
ITALIANO
BBS 1100, BBSE 1100
Inserimento momentaneo
Accensione: premere l’interruttore.
Fermo: lasciare libero l’interruttore.
Funzionamento continuo
Accensione: premere l’interruttore e
successivamente il blocco interruttore, poi
lasciare libero l’interruttore.
Fermo: premere e poi lasciare libero
l’interruttore.
Ancora prima dell’aziona tenere
l’apparecchio con ambedue le mani.
Avviamento solo con apparecchio
sollevato.
Durante la levigatura non esercitare molta pressione sull’aparecchio in quanto è
sufficiente il peso proprio.
Per la levigatura di legno si consiglia di
utilizzare il sacchetto raccoglipolvere.
In caso di insufficiente aspirazione
svuotare il sacchetto.
Nel caso in cui la polvere sia prodotta in
quantità elevata, al manicotto di
aspirazione potrà essere collegato un tubo
di aspirazione.
Per levigatura di metallo non aspirare la
polvere causa scintille e pericolo di
incendio.
Tener sempre ben pulite le fessure di ventilazione dell’apparecchio.
Utilizzare esclusivamente accessori e pezzi di ricambio AEG. L’installazione di pezzi
di ricambio non specificamente prescritti dall’AEG va preferibilmente effettuata dal
servizio di assistenza clienti AEG (ved. opuscolo Garanzia/Indirizzi Assistenza
tecnica).
In caso di mancanza del disegno esploso, può essere richiesto al seguente indirizzo:
AEG Elektrowerkzeuge, Max-Eyth-Strasse 10, D-71364 Winnenden, Germany.
Consultate il nostro catalogo per trovare l ’accessorio più adatto ed il relativo numero
di ordinazione.
Accensione–
Spegnimento
Istruzioni d’uso
Aspirazione
polvere
Manutenzione
Accessori
1
2
33
TÜRKÇE
BBS 1100, BBSE 1100
Geçici anahtarlama
Açma: Açma/kapama þalterine basøn
Kapama: Açma/kapama þalterini børakøn.
Sürekli anahtarlama
Açma: Açma/kapama þalterine basøn,
kilitleme düðmesine basøn ve daha sonra
açma/kapama þalterini børakøn.
Kapama: Açma/kapama þalterine basøn
ve børakøn.
Aleti çaløþtørmadan önce iki elinizle søkøca
tutun. Aleti malzeme üzerinden
kaldørdøktan sonra çaløþtørøn.
Alete fazla bastørmadan çaløþøn. Aletin kendi aðørløðø iyi bir zømpara sonucu için
yeterlidir.
Tahtalarø zømparalarken toz torbasø
kullanøn.
Emme performansø düþerse toz torbasønø
boþaltøn.
Büyük miktarda toz emilmesi
gerektiðinde emme rakoruna bir emme
hortumu baðlanabilir.
Metaller taþlanørken çøkan køvølcømlar
yangøn tehlikesi yaratacaðøndan, toz
emme donanømø kullanmayøn.
Aletin havalandørma araløklarønø daima temiz tutun.
Sadece AEG aksesuarønø ve yedek parçalarønø kullanøn. Deðiþtirilmesi
açøklanmamøþ olan parçalarø bir AEG müþteri servisinde deðiþtirin (Garanti
broþürüne ve müþteri servisi adreslerine dikkat edin).
Gerektiði takdirde aletin daðønøk görünüþ þemasø, alet tipinin ve tip etiketi
üzerindeki on hanelik sayønøn bildirilmesi koþuluyla müþteri servisinden veya
doðrudan AEG Elektrowerkzeuge, Max–Eyth–Straße 10, D–71364 Winnenden,
Germany adresinden istenebilir.
Sipariþ numaralarø ile birlikte aksesuarømøzø kataloglarømøzda bulabilirsiniz.
Açma/kapama
Çaløþørken
dikkat edilecek
hususlar
Toz emme
Bakøm
Aksesuar
1
2
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG BBS1100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG BBS1100 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans, Deens, Zweeds als bijlage per email.

De handleiding is 1,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info