32
ENGLISH
1. Press the ST/PROG button (Fig. 1/19). You will now
see a table. Enter the required sequence here.
NOTE:
Your playlist will be lost when the device is switched
oorwhenanewCD/DVDisinserted.
2. Use the cursor buttons to navigate in the table
(Fig. 1/21).
3. Enter the desired title and the chapter (for DVDs) or a
track (for CDs/MP3s) in the respective table position.
Use the numerical buttons to do this (Fig. 1/11).
4. Save your entries by selecting the “Play“ command
on the bottom border of the table using the cursor
buttons (Fig. 1/21).
5. Conrm the command by pressing the ENTER button
(Fig. 1/22) of the remote control.
Clear Playlist
1. Press the ST/PROG button. You will now see a table.
2. Use the cursor buttons to control the “Clear” function
on the bottom border of the table.
3. Conrm the command by pressing the ENTER button
of the remote control.
4. To hide the table again, press the ST/PROG button.
Enlarging a screen section
You can change the screen section when viewing DVDs,
VCDs or images.
Press the ZOOM button (Fig. 1/8) to change the screen
section. Press the button several times to select the suit-
able zoom factor or to return to the original zoom factor.
NOTE:
With the cursor buttons (Fig. 1/21) you can move
through the zoomed image.
Changing the viewing angle
SomeDVDsoerthepossibilitytoselecttheviewing
angle.
Press the ANGLE button (Fig. 1/6) to change the viewing
angle.
NOTE:
If changing the Viewing Angle is not possible, the sym-
bol
will be displayed.
Repeatpressingthethebuttontochooseadierent
viewing angle, or to return to the original viewing angle.
Changing the default settings
A large number of default settings can be comfortably
changed via the screen menu.
Press the SETUP-button (Fig. 1/5) on the remote control
to start the menu for changing the default settings (only
in DVD mode).
NOTE:
Many of these default settings can be changed via both
theremotecontrolandthemenu.Thedierenceis:If
you change the default settings via the remote control,
these changes will only be valid until the DVD-Player is
switchedoortheDVDischanged.
However, any changes made in the menu are permanent.
Understanding the menu structure
The Setup menu has two menu levels:
• Main menu: The main level is represented by graphical
symbols.
• Sub-menu: The corresponding sub-menu options can
be found under each of the main menu options.
Using the menu
Navigation and selection
• UsetheCursor Buttons (Fig. 1/21) ( , ) on the
remote control to browse through the main menu.
• Incontrasttothis,youmustusetheCursor Buttons
( , ) to move in the sub-menu.
• SelectamenuoptionwiththeENTER-button
(Fig. 1/22).
• UsetheENTER-button also to select an option (e.g.
“PAL” in the illustration on the top). The selected op-
tion is now highlighted.
• Pressthecursor button return to the submenu.
Slide control
In some menus you will nd slide controls. The slide con-
trol is used as follows:
1. Select with the ENTER-button.
2. Move the control with the Cursor Buttons ( , ).
3. Conrm the entry with the ENTER-button.
