621595
19
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
17
The work must be clamped firmly while drilling any tilting, twisting or shifting results
not only in a rough hole, but also increases drill beakage. For flat work, lay the
piece on a wooden base and clamp it firmly down against the table to prevent from
turning. If the piece is of irregular shape and cannot be laid flat on the table it
should be securely blocked and clamped.
C Boring in wood twist drills:
Although intending for metal drilling may also be
used for boring in wood, machine spur bits are generally preferred for working in
wood. They cut a square bottom hole and are designed for removal of wood chips.
Do not use hand bits which have a screw tip. At drill press speeds they turn into
the wood so rapidly as to lift the work off the table and whirl it.
4.ASSEMBLY
1. Open the box and take out the base and place it on a flat floor.
2. Take out the column with colomn bracket and screw it on the base.
3. Take out the head frame and assemble to the column.
4. Then use the allen key for tightening the set screw.
5. Bring out the handle, then screw it in the round head.
5. INSTALLATION
1. After installing the drill press, use the kerosene to wash out the anti-rust oil
which had been coated in the factory. Then wipe it with lubricant oil.
2. Install your drill press in flat, study floor or surface.
a. Check if the drill press is shaking when the motor is switched “ON”.
b. Check the table bracket if it is moving smoothly up and down.
c. Check if the spindle shaft moves smoothly.
6. LUBRICATION
The ball bearings in the quill and V-belt pulley are grease-scaled for life. Pull quill
down to maximum depth and oil moderately once every 3 months.
Slide bars: remove motor belt and push cam handle towards the motor. Oil right
and left slide bars lightly every 2 months. Grease table bracket if cranking
becomes difficult.
7.0 OPERATING TEST
a. Open the belt cover and release the left & right side cam shaft set handle. Then
move the belt handle backward until the belt has its right tension.
b. The rotation speed of spindle shaft can be charged by refering to the chart list
which is attached inside the belt cover, then you can push the belt handle to
adjust the V-belt to its right tension and set back the two sides cam shaft set
handle.
c. Plug the electric socket to the outlet and press “ON” the switch. Then the
spindle shaft will rotate clockwise.
d. If the spindle shaft rotates counter-clockwise, it means the wiring connection is
wrong, so turn off the switch and change the connection, after changing the
spindle shaft will rotate clockwise.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AA-Drill 77315 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AA-Drill 77315 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info