25
Multifunctional settings
EASY Menu
Item Description
ASPECT
Using the buttons ◄/► switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu
(
30).
KEYSTONE
Using the buttons ◄/► corrects the keystone distortion.
See the item KEYSTONE of section SETUP menu.
(
21)
MODE
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP
. Choose a suitable mode according to the
projected source.
NORMAL
CINEMA
DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs from
pre-assigned modes above, the display on the menu for the MODE
is “CUSTOM”. Please refer to the GAMMA (
27) and COLOR
TEMP (
28) items in the PICTURE menu.
•
When this function is performed, a certain extra such as a line may appear.
BRIGHTNESS
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHTNESS in the PICTURE menu
(
27).
CONTRAST
Using the buttons ◄/► adjusts the contrast.
See the item CONTRAST of section PICTURE menu
(
27).
COLOR
Using the buttons ◄/► adjusts the strength of whole color.
See the COLOR item in the PICTURE menu
(
28).
TINT
Using the buttons ◄/► adjusts the tint.
See the TINT item in the PICTURE menu
(
28).
SHRPNESS
Using the buttons ◄/► adjusts the sharpness.
See the SHARPNESS item in the PICTURE menu
(
28).
• There may be some noise when an adjustment is made. This is
not a malfunction.
WHISPER
Using the buttons ◄/► turns off/on the whisper mode.
See the WHISPER item in the SETUP menu
(
34).
With the EASY MENU, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
