464175
60
Verklein
Vergroot
Pagina terug
1/91
Pagina verder
En 60
SETUP
Setting sound field program parameters
CINEMA DSP parameters
Selects a surround decoder to be used with a sound field program
in the MOVIE category. J1
Change the effect level (level of the sound field effect to be added).
You can adjust the level of the sound field effect while checking the
sound effect.
Parameters usable in certain sound field
programs
2ch Stereo only
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
7ch Stereo only
Adjusts the center channel volume. J2
Adjusts the volume of the surround L channel. J2
Adjusts the volume of the surround R channel. J2
Adjusts the volume of the surround back channel. J2
Straight Enhancer/7ch Enhancer only
Adjusts the effect level of the compressed music enhancer mode.
<Dolby PLIIx Movie>
<Neo:6 Cinema>
Dolby PLIIx Movie
(Dolby PLII Movie)
Selects the Dolby Pro Logic IIx Movie (or
Dolby Pro Logic II Movie) decoder.
Neo:6 Cinema Selects the Neo:6 (Cinema) decoder.
DSP Level
Adjustable range -6 dB to 0 dB to +3 dB
Default setting 0 dB
Adjust “DSP Level” as follows:
The effect sound is too soft.
There are no differences between effects of the sound field
programs.
Increase the effect level.
The sound is dull.
The sound field effect is added too much.
Reduce the effect level.
Direct
Auto (Default) Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of “Bass” and
“Treble” are set to 0dB.
Off Does not bypass the DSP circuit and tone control
circuit.
CT Level
Adjustable range 0 to 100%
Default setting 100%
SL Level
Adjustable range 0 to 100%
Default setting 100%
SR Level
Adjustable range 0 to 100%
Default setting 100%
SB Level
Adjustable range 0 to 100%
Default setting 35% (7.1-channel configuration)
50% (6.1-channel configuration)
EFCT LVL
High (Default) Standard effect.
Low Sets when the high-frequency signals of the source are
emphasized excessively.
J
1 : Surround decoders cannot be changed when used with the following MOVIE
sound field programs.
Mono Movie
Sports
Action Game
Roleplaying Game
J
2 : Not displayed when speakers are set to be inactive.
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha RX-V467 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha RX-V467 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha RX-V467

Yamaha RX-V467 Snelstart handleiding - Nederlands - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Nederlands - 83 pagina's

Yamaha RX-V467 Snelstart handleiding - Deutsch - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Deutsch - 91 pagina's

Yamaha RX-V467 Snelstart handleiding - English - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Français - 91 pagina's

Yamaha RX-V467 Snelstart handleiding - Français - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Italiano - 91 pagina's

Yamaha RX-V467 Snelstart handleiding - Italiano - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Espanõl - 91 pagina's

Yamaha RX-V467 Snelstart handleiding - Espanõl - 8 pagina's

Yamaha RX-V467 Snelstart handleiding - Svenska - 8 pagina's

Yamaha RX-V467 Gebruiksaanwijzing - Svenska - 91 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info