530341
158
Verklein
Vergroot
Pagina terug
1/240
Pagina verder
Voice mode
Performance
mode
Song mode Utility mode File mode Master mode
Pattern mode
Mixing Voice
mode
Reference
Voice Edit mode Normal Voice Edit Element Edit
158
Owner’s Manual
These parameters are for editing the individual Elements that make up a Normal Voice.
[F6] EFFECT
n For details on the Effect connections in the Voice mode, see page 142. For details on the Effect Types, refer to the Effect Type list in the separate Data List booklet.
[SF1] CONNECT
This display gives you comprehensive control over the effects. For details about the parameters, see page 142.
[SF2] INS A (Insertion A)
These are for adjusting the various parameters of the Effect blocks. The number of parameters and values
available differs depending on the currently selected effect type. For more information, see the Effect Type List
in the separate Data List booklet. Note that the menu of the corresponding Effect block disappears when the
“thru” type is selected.
[SF3] INS B (Insertion A)
[SF4] REVERB
[SF5] CHORUS
Element Edit
[VOICE] Normal Voice selection [EDIT] Element selection
[F1] OSC (Oscillator)
[SF1] WAVE
From this display you can select the desired waveform or sound used for the Element.
ElementSw (Element Switch) Determines whether the currently selected Element is on or off.
Settings: off (inactive), on (active)
Wave No. (Waveform Number),
WaveCtgry (Waveform Category)
Determines the Waveform for the selected Element. See the Waveform list in the separate Data List.
[SF2] OUTPUT
From this display you can set certain output parameters for the selected Element.
KeyOnDelay Determines the time (delay) between the moment you press a note on the keyboard and the point at which the
sound is played. You can set different delay times for each Element.
Settings: 0 – 127
DelayTempoSync Determines whether or not the KeyOnDelay is synchronized to the tempo of the Arpeggio or sequencer (song
or pattern).
Settings: off (not synchronized), on (synchronized)
DelayTempo Determines the timing of the KeyOnDelay when the DelayTempoSync is set to on.
Settings: 16th, 8th/3 (eighth-note triplets), 16th. (dotted sixteenth notes), 8th, 4th/3 (quarter-note triplets), 8th. (dotted eighth
notes), 4th (quarter notes), 2nd/3 (half-note triplets), 4th. (dotted quarter notes), 2nd (half notes), whole/3 (whole-note
triplets), 2nd. (dotted half notes), 4th x 4 (quarter-note quadruplets; four quarter notes to the beat), 4th x 5 (quarter-note
quintuplets; five quarter notes to the beat), 4th x 6 (quarter-note sextuplets; six quarter notes to the beat), 4th x 7
(quarter-note septuplets; seven quarter notes to the beat), 4th x 8 (quarter-note octuplets; eight quarter notes to the
beat)
InsEffectOut
(Insertion Effect Output)
Determines which Insertion effect (A or B) is used to process each individual Element. The “thru” setting lets
you bypass the Insertion effects for the specific key. (This parameter is the same as “EL: OUT” on the [F6]
EFFECT [SF1] CONNECT display in Normal Common Edit. Making a setting here automatically changes the
setting of that parameter as well.)
Settings: thru, insA (Insertion Effect A), insB (Insertion Effect B)
[SF3] LIMIT
NoteLimit Determines the lowest and highest notes of the keyboard range for each Element. The selected Element will
sound only when you play notes within this range.
Settings: C -2 – G8
n You can also create a lower and an upper range for the Element, with a note range “hole” in the middle, by specifying
the highest note first. For example, setting a Note Limit of “C5 - C4” lets you play the Element from two separate ranges:
C -2 to C4 and C5 to G8. Notes played between C4 and C5 do not play the selected Element.
n You can also set the Center Key directly from the keyboard, by holding down the [INFORMATION] button and pressing
the desired key.
VelocityLimit Determines the minimum and maximum values of the velocity range within which each Element will respond.
Each Element will only sound for notes played within its specified velocity range. For example, this lets you
have one Element sound when you play softly and have a different one sound when you play strongly.
Settings: 1 –127
n You can also create separate low and high ranges for the Element, with a velocity “hole” in the middle, by specifying the
maximum value first. For example, setting a Velocity Limit of 93 - 34 lets you play the Element from two separate velocity
ranges: soft (1 – 34) and hard (93 – 127). Notes played at middle velocities between 35 and 92 do not play the selected
Element
VelCrossFade
(Velocity Cross Fade)
This determines how gradually the sound of an Element decreases in volume in proportion to the distance of
velocity changes outside the Velocity Limit setting (above). The practical application of this parameter is to
create natural-sounding velocity crossfades, in which different Elements change gradually depending on how
strongly or softly you play. The higher the value, the more gradual the level change.
Settings: 0 – 127
158

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MO8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MO8 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MO8

Yamaha MO8 Gebruiksaanwijzing - Deutsch - 239 pagina's

Yamaha MO8 Gebruiksaanwijzing - Français - 239 pagina's

Yamaha MO8 Gebruiksaanwijzing - Português - 240 pagina's

Yamaha MO8 Gebruiksaanwijzing - Espanõl - 240 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info