E-41
English
➃ RT (Radio Text) mode
Information about the program on the station
being received is displayed. Information is
displayed by a maximum of 64 Roman Alphabets
including umlaut sign.
* If other characters are used on the RT data,
they are displayed with underbars.
“RT WAIT” may flash while the unit is
receiving the data.
* If the RDS station does not employ the RT
data service, “NO RT” lights up on the display
for about 2 seconds and then returns to
frequency display mode.
* If the station has PS data, after that, it turns
into the PS mode.
➄ CT (Clock Time) mode
Current time is displayed in the following form.
The CT data from the station being received
changes every minute.
This unit corrects time of the built-in clock by
synchronizing it with the CT data. (This function
can also be canceled, if so desired. Refer to
page 43 for details.)
* “CT WAIT” may flash while the unit is
receiving the data. If the data is accidentally
cut off, “CT WAIT” may flash and then turn into
“NO CT”.
* If the RDS station does not employ the CT
data service, “NO CT” lights up on the display
for about 2 seconds and then returns to
frequency display mode.
* If the station has PS data, after that, it turns
into the PS mode.
Notes
● RDS data service cannot be utilized by this unit if the
received signal is not strong enough. Especially, the
RT (Radio Text mode) needs much data to be
received, so it may occur that RT mode cannot be
displayed even if other RDS modes (PS, PTY, etc.)
are displayed.
● There may be a case that RDS data reception is not
possible due to poor reception conditions. If so, press
the AUTO/MAN’L button so that “AUTO” goes off
from the display. Though the reception mode is
changed to monaural by this operation, when you
change the display to an RDS mode, RDS data may
be displayed.
● If the signal strength gets weakened by external
interference during receiving an RDS station, the
RDS data service may be cut off suddenly and turn
into the frequency display mode.
RECEIVING RDS STATIONS
<
U.K. and Europe models only
>
Hour Minute
