478460
41
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
DMU-2000 DATA MANAGEMENT UNIT Page 39
GRAPHIC METER DISPLAYS
TEMPERATURE / SWR INDICATION
VDD
The drain voltage of the final FETs is measured and
displayed here.
In the FT-2000 (100 W version) and FT-950, the mea-
surement range is 0 ~ 18 V, and the proper voltage is
around 13.8 V. On TX, if around 13.8 V is displayed,
the transceiver is operating normally.
In the FT-2000D (200 W version) and FTDX5000,
the measurement range is 0 ~ 60 V, and the proper
voltage is around 50 V. On TX, if around 50 V is
displayed, the transceiver is operating normally.
BIAS
While operating with the Class-A on the FT-2000D
(200 W version) and FTDX5000, the bias is changed
via the Menu item “141 tGEN BIAS” (FT-2000D)
or “169 TGEN BIAS” (FTDX5000) from Class-A to
Class-AB, this indication can be used to observe the
current setting. The indication is 0 ~ 100 % and “0 %”
means Class-AB, while “100 %” means Class-A.
Even if the Bias is varied, the RF output will not change
(up to the 75 Watts of maximum power under Class-
A), and you can change the bias safely even when you
are using a linear amplifier.
In the FT-2000 (100 W version) and FT-950 , this
indicator always shows “0 %.”
TEMP
This indicates the temperature (measured) of the final
amplifier FETs’ heat sink.
The measured temperature range of this meter is 0 ~
100 °C, and above 80 °C is the “Red Zone” tempera-
ture range to be avoided, so as to ensure a safe operat-
ing temperature range. When the temperature rises
above 80 °C, the fan speed will increase by a factor of
four, providing a significant increase in air flow. The
heat sink temperature may rise appreciably during
Class-A operation on the FT-2000D (200 W version)
and FTDX5000, especially if the ambient temperature
is warm, and we recommend that you monitor the tem-
perature during Class-A transmission, adjusting the
Bias control downward (more toward Class-AB) if ex-
cessive heating is observed. A lower bias level will
cause less heat to be dissipated, thus reducing the heat
sink temperature.
SWR
This displays the SWR characteristic of the amateur
band that you are currently using, with points along
the graph indicating the frequencies that have been
measured.

41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu DMU-2000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu DMU-2000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info