AUS
AFTER SALES SUPPORT
email: help@powertoolsupport.com
1800 909 909
MODEL: T12VW / T12VWP PRODUCT CODE: 51546 12/2015
Phone lines available Monday to Friday, 8am - 6pm.
AUS
AFTER SALES SUPPORT
email: help@powertoolsupport.com
1800 909 909
MODEL: T12VW / T12VWP PRODUCT CODE: 51546 12/2015
Phone lines available Monday to Friday, 8am - 6pm.
Operating Instructions
Drilling metals
• Always clamp sheet metal.
• Support thin metal with a block of wood to avoid distorting it.
• Use a punch to mark the centre of the hole.
• Use a suitable lubricant for the material you are working on,
USE: FOR:
Oil Steel
Turpentine or paran Aluminium
Do not lubricate Brass, copper or cast iron
Drilling plastics and plastic coated chipboard
• Use high speed drill bits
• See drilling wood below
Drilling masonry
• This drill/driver is NOT designed for drilling masonry. Purchase or hire a Hammer drill.
Drilling wood
• Clamp a piece of scrap wood to the back of your work to prevent splintering.
All drilling operations
• Mark o the centre of the hole using a centre punch or nail.
• Don’t force the drill/driver, let it work at its own pace.
• Keep the drill bit sharp.
• Reduce pressure as the drill/driver is about to break through the item being drilled.
LED working light
When the unit is switched on, the LED working light (6) also comes on to ensure better vision
and to make working in dark areas more safe. The working light goes out when the On/Off
switch is released.
CAUTION! LED is laser class 1! Do not look directly into the laser as this may result in
damage to the eye
Operating Instructions
8
