694500
32
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
32
GB
extra air supply and enhancing chimney draught. Once the kindling has caught  re you can add extra wood. (Put
the logs loosely on the  re so that the  ames can catch on all around).
How the air valve works
The air slider has three settings, i.e.
1. entirely extended, primary, secondary and tertiary air supply will open.
2. press until  rst click, only secondary and tertiary air supply will open, the stove will now have the highest
e ciency and the window pane rinser will work best
3. press until second click, everything closes and stove will slowly shut down.
It is prohibited to light the stove with liquids like petrol or spirits.
Do not have the cooker hood on in the room where you operate your stove.
Never touch the varnished parts when you heat your stove.
Avoid  nger marks
Do not touch the glass of the stove with your  ngers. Finger marks will burn into the glass and cannot be removed
later.
Lighting the stove for the  rst time
Discolouration of walls, ceilings and grates
The walls, ceilings and grates may show some discolouration after lighting your stove. This is caused by the
dust particles that burn in the convection cover. WANDERS cannot be held responsible for this natural process.
To minimize discolouring we refer to the advice given for atmospheric hearths. Your installer can give you more
information about this.
When you light the Ruby for the  rst time, the hearth must still ‘anneal’ and temper itself. The unit has a heat
resistant lacquer which must burn in the stove at temperatures above 400 °Celsius. This will happen during the
rst few times of lighting the stove and temperatures rise to 600 °C. Though this may give an unpleasant smell, it
is otherwise harmless. It is advisable to keep the stove burning with limited fuel for at least 6 hours when lighting
the stove for the  rst 4 or 5 times. Air the room well when the stove is burning. Make sure that any cooking hood
is not turned on when the stove is burning; a cooking hood extracts the combustion air that the stove needs.
Some deposit may form on the glass panes of the stove when you ‘anneal’ your hearth. You can easily remove this
deposit with a damp cloth after the stove has cooled down. You can also use some cleansing agent for ceramic
rings. Please make sure you do not leave any  nger marks on the clean glass. Finger marks burn into the glass and
cannot be removed later.
Newly built house or recently renovated?
It is advisable to wait six weeks before lighting the stove in a newly built house that has recently been completed,
or in a space that has recently been renovated drastically. The walls and ceilings still contain gases, softeners and
moisture from plasterwork or paint. The warm air-streams may discolour the dust particles in the space, which
may stick to walls and ceilings. Even the moisture in the walls and ceilings will become warm and may cause
yellow stains.
1 2 3
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Wanders Ruby bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Wanders Ruby in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info