667331
29
Verklein
Vergroot
Pagina terug
1/332
Pagina verder
ENNO
27
SVFIDAPL
0478 192 9803 B - EN
11.7 Mowing
The following points must be noted
before engaging the mowing blade:
No persons, particularly children or
animals must be in the vicinity.
Carefully inspect the complete area on
which the machine is to be used and
remove all stones, sticks, wire, bones
and other foreign objects.
Before engaging the mowing deck,
visually inspect to determine whether
the safety devices (V-belt covers,
deflector flap etc.) are properly installed
and are in good condition.
Only engage the mowing blades at the
maximum engine speed.
Only engage the mowing blades when
the machine is already on the grass
area to be mown.
Do not engage the mowing blades in tall
grass or when set to the lowest cutting
level.
Engage the mowing blade in the
following sequence:
Start the engine. (Ö 11.2)
Drive the machine onto the lawn.
Do not engage the mowing deck in tall
grass or when set to the lowest cutting
level. (Ö 8.12)
Press the mowing deck switch to
engage the mowing deck. (Ö 8.5)
During mowing:
Always set the throttle lever to the MAX
position when mowing. (Ö 8.2), (Ö 8.3)
Always adapt the driving speed to the
grass height/cutting level when
mowing.
A low driving speed should be selected
when mowing tall grass / at a low cutting
level. (Ö 8.9)
Disengage the mowing blade in the
following sequence:
Drive onto an area of grass which has
already been mown or select the
highest mowing deck cutting level.
(Ö 8.12)
Press the mowing deck button to
disengage the mowing deck. (Ö 8.5)
11.8 Pulling loads
Maximum trailer weight on a level
surface = 250 kg
Maximum trailer weight on a maximum 10°
inclination = 100 kg
Always set the maximum engine
speed for mowing. The mowing
blades are optimised for this speed
and this produces the best cutting
pattern as well as the best cutting
performance.
If the mowing deck is engaged
when driving, the engine speed is
briefly reduced due to the additional
load as the mowing blades start to
rotate. The engine then continues
to run at the selected engine speed.
Should the discharge opening
become blocked or if the engine
speed is reduced during a mowing
operation, a lower driving speed or
a higher cutting level should be
selected.
In order to maintain a well-cut lawn,
the section "Notes on mowing"
should be read and observed
before mowing. (Ö 9.)
Risk of injury:
After disengaging the mowing deck,
beware of the mowing blade
running on for several seconds
before coming to a standstill (max.
5 seconds).
Risk of injury:
Before attaching loads, always
check the braking function.
(Ö 8.10)
The driving characteristics of the
machine are changed when
transporting loads (longer braking
distances, select lower driving
speed when changing direction
etc.). The heavier the load, the
more the driving characteristics are
changed.
Avoid damage to the machine.
The maximum pulled load is
decreased on inclines.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viking MT 4112SZ bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viking MT 4112SZ in de taal/talen: Engels, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 26,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Viking MT 4112SZ

Viking MT 4112SZ Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Português, Espanõl - 350 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info