667331
28
Verklein
Vergroot
Pagina terug
1/332
Pagina verder
0478 192 9803 B - EN
26
Stop the engine in the following
sequence:
Brake the machine to a complete
standstill.
Disengage the mowing deck. (Ö 8.5)
Set the throttle lever to the MIN
position. (Ö 8.2), (Ö 8.3)
Turn the ignition key to the “engine off”
position. The engine is stopped.
Engage the parking brake. (Ö 8.11)
Close the fuel cock if necessary.
(Ö 13.12)
Remove the ignition key and keep in a
place where only authorised persons
can access it.
11.4 Driving
The following points must be noted
before driving:
Always check the braking function
before driving. (Ö 8.10)
Engage the gearbox freewheel
lever. (Ö 8.13)
Bring the machine to a standstill and
only then actuate the driving direction
selector lever.
Forward driving:
Start the engine. (Ö 11.2)
Set driving direction selector lever to
the front position (forward driving
direction). (Ö 8.6)
Disengage the parking brake, if
engaged. (Ö 8.11)
By pressing the drive pedal, the driving
speed is regulated and the machine
moves forward.
Reversing:
Start the engine. (Ö 11.2)
Set driving direction selector lever to
the rear position (reverse driving
direction). (Ö 8.6)
Disengage the parking brake, if
engaged. (Ö 8.11)
By pressing the drive pedal, the driving
speed is regulated and the machine is
set in reverse motion.
11.5 Braking
Reduce driving speed.
Press the brake pedal down evenly until
the machine comes to a standstill.
11.6 Adjusting the cutting height
Brake the machine to a complete
standstill. (Ö 11.5)
Unlock and hold the cutting height
adjustment lever. (Ö 8.12)
The cutting height can be adjusted by
moving the cutting height adjustment
lever upwards or downwards to
7 cutting levels.
Lock the cutting height adjustment
lever. (Ö 8.12)
Cutting level 1:
Cutting height 35 mm
Cutting level 7:
Cutting height 90 mm
Risk of injury:
For safety reasons, the ignition key
must always be removed when
leaving the machine after stopping
the engine. Keep the ignition key
where only authorised persons
have access to it, in order to
prevent use by children or other
persons unfamiliar with the
machine.
Furthermore, the parking brake
must always be engaged before
leaving the machine. (Ö 8.11)
Warning:
A low driving speed must always be
selected on rough terrain.
Before each change of direction,
especially on slopes, the driving
speed must be appropriately
reduced.
In order to ensure optimum cooling
of the gearbox, the driving speed
should only be regulated via the
drive pedal at maximum engine
speed.
Risk of injury:
Before braking, reduce the driving
speed by easing the pressure on
the drive pedal:
If possible, refrain from braking
abruptly at the maximum driving
speed.
Risk of injury:
For safety reasons, only adjust the
cutting height when the machine is
at a standstill.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viking MT 4112SZ bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viking MT 4112SZ in de taal/talen: Engels, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 26,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Viking MT 4112SZ

Viking MT 4112SZ Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Português, Espanõl - 350 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info