813830
36
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
36
Self-consumption
The power generated by the fuel cell module is used in
the same building or exported to the grid. If the power
consumption is higher than the generated power, the
total generated power is used in the building. This
makes sense if the feed-in remuneration is lower than
the power supply price. Activate the energy manager
to optimise self-consumption.
Energy manager
The energy manager optimises the fuel cell start times
using the power consumption and heat demand within
the building.
The following data are used for heat demand:
Time program for room heating
Set room temperature
Time program for DHW heating
Set DHW temperature
The energy manager calculates the expected fuel cell
module runtimes using the heat demand. The fuel cell
module only switches on if the expected runtime is at
least 2 hours.
A power consumption profile is used for the power
consumption:
For systems with an energy meter, the power con-
sumption profile is calculated from the consumption
data of the last 72 hours.
For systems without an energy meter, a standard
profile is used.
The start times are determined by the other factors in
the control strategies. You can choose 2 control strat-
egies:
Economical operation:
The fuel cell module start times are selected to mini-
mise energy costs in the following 24 hours.
Ecological operation:
The fuel cell module start times are selected to mini-
mise CO2 emissions in the following 24 hours.
For economical operation, the following factors are
taken into account:
Heat demand of the building
Power consumption profile
Feed-in remuneration
Power supply price
Thermal energy generated
Gas consumption
Gas price
Your contractor can adjust the prices if required.
For ecological operation, the following factors are
taken into account:
Heat demand of the building
Power consumption profile
Thermal energy generated
Gas consumption
CO2 emissions of the gas
CO2 emissions of the power exported to the grid
CO2 emissions of the energy drawn from the grid
Note
If the energy manager is switched off, the fuel cell start
time is determined only using the heat demand. The
heat demand within the building must be high enough
to achieve a runtime of at least 2 hours.
Example
You have selected economical operation.
The calculated heat demand produces an expected
runtime of 4 hours. The calculated power consumption
profile can be seen in Figure 5.
Based on the energy costs calculated from the other
factors, the next start time is calculated using the low-
est energy costs over the runtime, in this case 09:00.
Appendix
Terminology (cont.)
6194128
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viessmann Vitovalor PA2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viessmann Vitovalor PA2 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Viessmann Vitovalor PA2

Viessmann Vitovalor PA2 Gebruiksaanwijzing - Deutsch - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info