567740
15
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
www.velodyne.com
Optimum Series User’s Manual - 9
REAR PANEL CONNECTIONS -
DETAILED EXPLANATION
Your new subwoofer is equipped with both speaker-level and line-level inputs. Use the RCA/Phono type “INPUT”
jacks when connecting your subwoofer to a pre-amp, signal processor, or line-level crossover. The “SPEAKER
LEVEL INPUT” jacks connect directly to the speaker outputs of an integrated amplier or receiver. Your amplier
section will notice no additional loading eects when you use these inputs because of their high impedance.
Note: Do not use both the RCA/Phono “INPUT” connections and “SPEAKER LEVEL INPUT” connections
simultaneously.
Low-Pass Crossover
Both sets of inputs sum the left and right channels together and the resulting signal is passed through an
adjustable low-pass crossover before being amplied. The crossover control allows you to adjust the upper
limit of the subwoofer’s frequency response from 40 to 135 Hz. The subwoofer’s response will begin rolling o
above the frequency you set this control to. (See note above about frequency limits.)
You should set the crossover frequency to obtain a smooth and seamless transition from the subwoofer to the
main speakers in your system. Do this by listening to the blend between your satellites and subwoofer using
familiar material. If your main speakers are smaller units with limited low frequency output, you may wish to
choose a higher frequency (such as 100 -120 Hz) than you would with larger speakers which have greater low
frequency output. With larger speakers, you might start with this control set lower, such as 70 Hz.
Subwoofer Direct
Subwoofer Direct is the leftmost setting on the low-pass crossover knob and will allow frequencies up to 200
Hz into the subwoofer. If you are not using an external crossover, we recommend that you use the one provided
within the subwoofer for optimum performance.
Caution!!!
To avoid damage to your main amplier, be sure to maintain correct polarity when making all connections. Red
(positive) to red, and black (negative) to black. Be sure that all connections are tight, and that there are no loose
strands or frayed wires.
Power Switch
The master power switch is located on the middle left half of the unit. This rocker style switch is the main on/o
for the unit. This switch should be set to position 1 for on (up), 0 for o (down).
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Velodyne Optimum-12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Velodyne Optimum-12 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Velodyne Optimum-12

Velodyne Optimum-12 Aanvulling / aanpassing - English - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info