809761

VTech VM3263 Handleiding

1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Specifications are subject to change without notice.
© 2023 VTech Telecomunications Ltd.
All rights reserved. 01/23. VM3263_UK_QSG_V2.
VM3263
2.8” Video Monitor
with Night Light
1 Connect the baby monitor
2
Power on or off the baby monitor
What’s in the box
4
Status check
Once you power on the parent
unit, the parent unit displays
image from the baby unit, and
the LINK LED light turns on.
3 Positioning the baby monitor
Quick start guide
Talk to your baby unit
Press and hold TALK and speak to your
parent unit. Your voice is transmitted to
the baby unit. When finished talking,
release the TALK key to hear your baby
again.
Basic operation - Parent unit
Overview - Parent unit
Technical specications
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The applied nameplate is located at the bottom of the baby unit’s
base.
When using your equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock
and injury, including the following:
1. Follow all warnings and instructions marked on the
product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above
2 metres.
4. This product is intended as an aid. It is not a substitute for
responsible and proper adult supervision and should not
be used as such.
5. This product is not intended for use as a medical monitor.
6. Do not use this product near water, for example, near to
a bath, sink, swimming pool or shower.
7. CAUTION: Use only the battery provided. There may be
a risk of explosion if a wrong type of battery is used for
the parent unit. The battery cannot be subjected to high
or low extreme temperature and low air pressure at high
altitude during use, storage or transportation. Disposal
of battery in fire or a hot oven, mechanically crushing or
cutting the battery can result in an explosion. Leaving the
battery in an extremely high temperature surrounding
environment can result in an explosion or the leakage of
flammable liquid of gas. Battery subjected to extremely
low air pressure may result in an explosion or the leakage
of flammable liquid or gas. Dispose of used batteries
according to the information in instructions.
8. Use only the power adaptors included with this product.
Incorrect power adaptor polarity or voltage can seriously
damage the product.
Power adaptor information:
Parent unit output: 5V DC 1A
VTech Telecommunications Ltd.
Model: VT05EUK05100
Baby unit output: 5V DC 1A.
VTech Telecommunications Ltd.
Model: VT05EUK05100
Rechargeable battery information:
Zhuhai Great Power Energy Co., Ltd.
Li-ion battery, 3.6V, 2600mAh, 9.36Wh;
Model: ICR18650-2.6Ah-3.6V-1S1P
9. The power adaptor is intended to be correctly oriented
in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet (power
adaptor) should be installed near the equipment and
should be easily accessible.
11. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth
for cleaning.
12. Do not modify the power adaptors or replace with other
adaptors, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not
install this product where the cords may be walked on or
crimped.
14. This product should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supply in your home,
consult your dealer or electricity supply provider.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf,
stand or other unstable surfaces.
17. This product should not be placed in any area where
proper ventilation is not provided. Slots and openings
in the back or bottom of this product are provided for
ventilation. To protect them from overheating, these
openings must not be blocked by placing the product
on a soft surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or heat
source.
18. Never push objects of any kind into this product through
the slots because they may touch dangerous voltage
points or create a short circuit. Never spill liquid of any
kind on the product.
19. To reduce the risk of electric shock, do not disassemble
this product, but take it to an authorised service facility.
Disassembling or removing parts of the product other
than via the battery door may expose you to dangerous
voltages or other risks. Incorrect reassembling can cause
electric shock when the product is subsequently used.
20. You should test the sound reception every time you turn
on the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using certain
electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the
product has never been used before purchase, reset the
baby monitor periodically by powering off and then
powering on the units, and power off the baby monitor
if you are not intending to use it for some time.
23. Children should be supervised to ensure that they do not
play with the product.
24. The small parts of this monitor can be swallowed by
babies or small children. Keep these parts out of reach
of children.
25. The product is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
SAVE THESE INSTRUCTIONS
Cautions
• Use and store the product at a temperature between 0oC
and 40oC.
• Mishandling batteries can cause burn, fire or explosion
hazards.
• Batteries should not be exposed to excessive heat such
as bright sunshine or fire.
• Do not expose the product to extreme cold, heat or
direct sunlight. Do not put the product close to a heating
source.
• Warning—Strangulation Hazard—
Children have STRANGLED in cords. Keep
this cord out of the reach of children (more
than 0.9m away). Do not remove warning
label on the adaptor cord.
• Never place the camera unit(s) inside the baby’s cot or
playpen. Never cover the camera unit(s) or parent unit
with anything such as a towel or a blanket.
• Other electronic products may cause interference with
your camera unit. Try installing your camera unit as far
away from these electronic devices as possible: wireless
routers, radios, cellular telephones, intercoms, room
monitors, televisions, personal computers, kitchen appli-
ances and cordless telephones.
Important safety instructions
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 2405 - 2475 MHz
Parent unit: 2405 - 2475 MHz
Maximum power used by the transmitter: 0.1W (100mW)
Channels 32
LCD 2.8” Colour LCD
(QVGA 320x240 pixel)
Nominal effective range Actual operating range may vary according to environmental
conditions at the time of use.
Power requirements Parent unit: 3.6V, 2600mAh Li-ion, 9.36Wh Li-ion battery
Baby unit power adaptor: Output: 5V DC @ 1A
Parent unit power adaptor: Output: 5V DC @ 1A
Connect the baby unit to a power
supply to turn it on. Disconnect the
baby unit to turn it off.
Press and hold POWER to power on or off
your parent unit.
Caution
• The default volume of your parent unit
is level 3, and the maximum volume
is level 5. If you experience feedback
noise from your baby monitor while
positioning:
- Make sure your baby unit and parent unit
are more than 1 m apart, OR
- Turn down the volume of your parent unit.
NOTESNOTE
Note
• To avoid interference from other electronic devices,
place your baby monitor at least 1 m away from
devices such as wireless routers, microwaves, cell
phones and computers.
Press and hold
Turn off the screen
Press POWER/LCD OFF to switch off the
screen. You can still hear sound from the
selected baby unit.
Tip
• Press any key on the parent unit to turn on
the screen again.
Use the menu
Press MENU to enter the menu, or save a setting. You can use the parent unit for advanced
settings or operations, such as to play or stop the baby unit’s lullaby, or to adjust the baby
unit sound sensitivity.
While in the menu:
• Press or to scroll among
the menu options.
• Press or to select an item.
• Press SELECT to confirm your
selection.
• Press TALK/EXIT to exit the
menu and return to live view.
Quick start guide
NOTESNOTE
• The rechargeable battery in the parent unit is built-in.
• Use only the power adaptors supplied with this product.
• Make sure the parent unit and the baby unit are not connected to an electronically controlled electric outlet.
• Connect the power adaptors in a vertical or floor mount position only. The adaptor prongs are not designed
to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-ta-
ble, or cabinet outlets. Otherwise, the adaptors may not properly connect to the outlets.
• Make sure the parent unit, the baby unit and the power adaptor cords are out of reach of children.
10
11
12
1
2
4
5
6
8
9
7
3
Parent unit icons
≥
<1m
1m
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
Caution
• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the
baby’s cot or playpen.
Overview - Baby unit
1
2
8
6
7
9
10
11
4
5
3
1
2
8
6
7
9
10
11
4
5
3
1
2
8
6
7
9
10
11
4
5
3
Pan and Tilt the Baby Unit
• Press Arrow keys to pan and tilt
the Baby Unit.
Zoom
1. Press MENU when in idle mode.
2. Choose .
3. Press or to choose (Zoom in) or
(Zoom out), then press SELECT to
confirm your selection.
Press and hold
1 Night light key
2Light Sensor
3Camera lens
4Infrared LEDs
5Microphone
6Night light
7PAIR key
• The parent unit and baby unit provided
are already paired.
8Speaker
9Temperature sensor
10 Power jack
11 Slots for wall mounting
1 Connect the baby monitor (cont’d)
Charge the parent unit battery
When you have connected and turned on the parent unit, the battery will be charged
automatically.
NOTESNOTE
Notes
• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When
the parent unit battery is fully charged, the battery icon becomes solid .
• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time,
turn the parent unit off while charging.
• The standby time varies depending on the sensitivity level set, your actual use and the age of the
battery.
The battery icon indicates the battery status (see the following table).
Battery indicators Battery status Action
The screen displays .
The light flashes.
The battery has very little
charge and may be used for
only a short time.
Charge
without interruption
(about
30 minutes).
The battery icon becomes
solid .
The battery is fully charged. To keep the battery charged, connect
it to AC power when not in use.
1Antenna
2Battery LED light
33-level sound indicator light
4Arrow keys
5MENU/SELECT
6LINK LED light
• On when the parent unit is linked to the
baby unit.
• Flashes when the link to the baby unit is lost.
7TALK/EXIT
• Press and hold to talk to the baby unit.
• While in a submenu, press to exit.
8POWER/LCD OFF
9Microphone
10 Power jack
11 RESET
• Force reboot the parent unit.
12 Speaker
Submenu
Main menu
Main
menu Sub-menu
Volume
• Adjust the parent unit’s speaker
volume.
Settings
Brightness
• Adjust the parent unit’s LCD screen
brightness level.
Screen off timer
• The parent unit display will dim to
conserve energy after your selected
time of inactivity.
Zoom
• Zoom in and out of the video
displayed from the baby unit.
Temperature
• Set temperature display in Fahrenheit (oF)
or Celsius (oC).
• Set the minimum/maximum temperature.
• Turn on/off temperature alert tone.
• Set the parent unit to beep whenever the
room temperature detected by the baby
unit falls outside of the set temperature
range.
Main menu icons
Status icons
Connection status
• or displays when strong signal strength is
detected between the baby unit and the parent unit.
• or displays when moderate or low signal strength is
detected between the baby unit and the parent unit.
Current view status
• Displays the number of the baby unit that is being viewed.
Zoom
• Displays when the current image on the parent unit has
zoomed in.
Night vision
• Displays when the baby unit being viewed has activated
the night vision feature.
Lullaby
• Displays when a lullaby is playing.
Talkback
• Displays when talking back to the baby unit from the
parent unit.
Night light
• Displays when the baby unit’s night light is turned on.
• Displays when the night light Auto-on feature is activated,
but not yet triggered by sound.
• Displays when the baby unit’s night light has been
triggered to turn on automatically by sound.
Mute alert
• Displays when the parent unit speaker volume is set to
zero.
• Displays when the parent unit is talking to the baby unit.
or
Real-time temperature
• Displays the real-time temperature detected by the baby
unit in Fahrenheit (oF) or Celsius (oC) (e.g. 57
oF or 14
oC).
Battery status
• animates when the battery is charging.
• displays solid when the battery is fully charged.
• displays when the battery is low and needs charging.
Main
menu Sub-menu
Sound Detection
Sound-activated screen
• When turned on, and the baby
unit detects no sound, the parent
unit screen stays off to save power.
Once sound is detected, the parent
unit screen and speaker turns on
automatically, and you can see and
hear your baby. The parent unit will
then turn off again after 50 seconds
of no sound detection.
NOTESNOTE
Note
• When the parent unit screen is off
and it receives alerts, for example,
link lost between parent unit and
baby unit, or battery is low, the
parent unit screen and speaker will
turn on for 10 seconds.
VOX (Voice Activated Alert) Sensitivity
• You can choose to hear sounds
from the baby unit continuously,
or to only hear sounds that exceed
a set sensitivity level. Adjust the
microphone sensitivity of your baby
unit, the higher the sensitivity level,
the more sensitive the baby unit is in
detecting sounds to be transmitted to
the parent unit. See Sound sensitivity
and sound activation section.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VTech VM3263 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VTech VM3263 in de taal/talen: Engels als bijlage per email.

De handleiding is 4.82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info