en
16
* depending on model
Additional options can be set with the
buttons 8.
Ÿ
Express Wash *
The >>Express Wash<< function can
reduce the running time by approx. 20% to
50% depending on the selected rinse
programme. To obtain optimum cleaning
and drying results at a reduced running
time, water and energy consumption are
increased.
§
Half load *
If you have only a few items to wash (e.g.
glasses, cups, plates), you can switch to
“half load”. This will save water, energy
and time. It is recommended to put a little
less detergent in the detergent dispenser
than for a full load.
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. This data refers to normal
conditions and the water hardness set
value 2. Different influencing factors such
as water temperature or mains pressure
may result in deviations.
Switching on the appliance
– Turn on the tap fully.
– Open the door.
– Switch on the main switch (.
The display of the last selected
programme lights up. This programme
runs if no other programme button `
is pressed.
– Close the door.
The programme starts running.
End of programme
The programme has ended when
the programme end display @ and
the display of the executed programme
are lit.
Theendoftheprogramme isalso
indicated by an acoustic signal. This
function can be changed as follows:
– Open the door.
– Hold down programme button 3
and switch on the main switch (.
– Release both buttons.
The programme button 3 flashes.
To change the setting:
– Press programme button 3. Each
time the Programme button 3
is pressed, the buzzing sound changes
in 4 stages (from off to loud).
– Switch off main switch (, the set
value is saved.
– Close the door.
Additional options Basic functions
