9
GB
• Shake the base unit for a few moments and then empty it completely into your
sink – fig.21.
To obtain the best result, we recommend that this operation is done twice.
• Screw back and tighten up the boiler rinse cap with a coin.
• Put the boiler rinse cap cover back in place.
•
TThhee nneexxtt ttiimmee yyoouu uussee tthhee ggeenneerraattoorr,, hhoolldd ddoowwnn tthhee ““rreessttaarrtt”” bbuuttttoonn ttoo ttuurrnn ooffff
tthhee oorraannggee lliigghhtt
– fig.12.
Storing your generator
• Press the illuminated on/off switch and unplug the generator. Store the
electrical cord in its storage place – fig.22.
• Raise the lock-system hoop over the iron until it locks into place (audible click)
– fig.2.
• Your iron is then safely retained on its base. Warning: do not touch the
soleplate while still hot.
• Slot the extension cord outlet in the notch (depending on model). Take the end
of the cord support and press to return the flexible part into the base.
• Store the steam cord in its slide storage place. Take it, fold it in two so as to
make a loop. Put the end of this loop in the slide storage place then push gently
until you see the end on the other side of the slide storage place – fig.23.
• Leave the iron (and the iron rest) to cool down for 30 minutes.
• You can then put your steam generator away, carrying it by the handle – fig.1.
