Remote control
1. Power
2. Timer
3. Mode
4. Temperature +
5. Temperature -
6. Fan
7. Sleep mode
Emptying of the water tank
• As soon as the water tank is full, the Watertank full indicator lights up, the standby mode automatically
turns on, it will sound the warning alarm and all the buttons will be locked until the tank is emptied.
• Turn off the power and unplug the power
cord. To empty of the watertank you need
to remove the rubber stopper on the bottom
of the unit and let the water leak into a
container. Once you reboot the device, it
will work normally.
• Continuous drainage (only in dehumidifying
mode): Remove the rubber stopper on the
bottom of the unit and connect the drainage
hose to the opening. Let the water leak into
a container (pic.4).
Pic.4
Cleaning
• Always disconnect the appliance from the power outlet and let it cool before cleaning. Never immerse
the appliance in water to prevent electric shocks.
• Wipe over the exterior of the appliance with a soft wet cloth and neutral detergent and then wipe dry
with a dry cloth.
• Do not use gasoline or other chemicals to
clean the unit.
• Clean the dust filter once every two weeks.
Clean the dust filter with neutral detergent
and about 40°C water. Rinse off any
detergent, then let it air-dry before inserting
it back into the unit (pic.5).
• If you do not use the unit for a longer time,
empty the water tank completely. Make sure
that the unit is disconnected from the power
supply and that it is clean. Keep the unit
covered in a dry place.
Pic.5
