13MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C
English / USA
ANSI B 175.1-2000 chainsaw
kickback standard
Section 5.11 of ANSI standard
B 175.1-2000, sets certain performance
and design criteria related to chainsaw
kickback, which has been adopted for
electric chain saws in UL 16 62 in
section 30.
To comply with kickback § 30 of
UL 16 62 electric chain saws:
– must, in their original condition,
meet a 45° computer derived
kickback angle when equipped with
certain cutting attachments,
– and must be equipped with at least
two devices to reduce the risk of
kickback injury, such as a chain
brake, low kickback chain, reduced
kickback bar etc.
The computer derived angles for electric
saws are measured by applying a
computer program to test results from
the kickback test machine.
!Warning!
The computer derived angles of § 5.11
of ANSI B 175.1-2000 may bear no
relationship to actual kickback bar
rotation angles that may occur in real life
cutting situations. In addition, features
designed to reduce kickback injuries
may lose some of their effectiveness
when they are no longer in their original
condition, especially if they have been
improperly maintained. Compliance with
§ 5.11 of ANSI B 175.1-2000 does not
automatic-ally mean that in a real life
kickback the bar and chain will rotate at
most 45°.
!Warning!
In order for electric chainsaws to comply
with the computed kickback angle
requirements of § 30 of UL 16 62 / § 5.11
of ANSI B 175.1-2000 use only the
following cutting attachments:
– bar and chain combinations listed
as complying in the "Specifications"
section of the Owner's Manual or
– other replacement bar and chain
combinations marked in
accordance with the standard for
use on the powerhead or
– replacement chain designated
"low kickback saw chain''.
See the section on "Low kickback saw
chain and reduced kickback bars"
Devices for reducing the risk of
kickback injury
STIHL recommends the use of the
STIHL Quickstop chain brake on your
power-head with green labeled reduced
kickback bars and low kickback chains.
!Warning!
To reduce the risk of injury, stop using
the saw immediately if the chain brake
does not function properly. Take the saw
to your local STIHL Service Center! Do
not use the saw until the problem has
been rectified (see the section "Chain
Brake").
Quickstop chain brake
STIHL has developed a chain stopping
system designed to reduce the risk of
injury in certain kickback situations. It is
called a Quickstop chain brake. The
Quickstop is available as standard
equipment on your STIHL chainsaw and
is available for installation on most older
STIHL saws. Ask your dealer to retrofit
your older model saw with a chain brake.
