608726
115
Verklein
Vergroot
Pagina terug
1/408
Pagina verder
The references  for correct sharpening are given 
in Fig. 20:
A = Incorrect sharpening
B = Sharpening limits
C = Incorrect and unequal angles
It is  important to  retain the correct balance after 
sharpening.
3 or 4 point blades can be used from both sides. 
When one side of the points is worn, the blade can 
be turned and the other side used.
WARNING!
The blade must never be
repaired, but must be replaced as soon as
signs of breaking are noted or the sharpening
limit is exceeded.
HEAD LINE REPLACEMENT (Fig. 21)
–  Follow the sequence indicated in the gure.
SHARPENING THE LINE CUTTING KNIFE
(Fig. 22)
–  Remove the line cutting knife (1) from the guard 
(2) by unscrewing the screws (3).
–  Fix the line cutting knife in a vice and sharpen it 
using a at le, being careful to retain the origi-
nal cutting angle.
–  Ret the knife on the guard.
EXTRAORDINARY MAINTENANCE
All maintenance operations not foreseen in  this 
manual must be  performed  exclusively  by  your 
dealer.
All and any operations performed in unauthorised 
centres or by unqualied persons will totally invali-
date the warranty.
STORAGE
After  every  work  stint,  clean  the  machine  thor-
oughly to remove all dust and debris, and repair 
or replace any faulty parts.
The machine must be stored in a dry place away 
from the  elements  and  with  the  cover  correctly 
tted.
LONG PERIODS OF DISUSE
IMPORTANT
If you are not going to use the
machine for a period of more than 23 months, we
recommend you do a few things before putting it
away. This will make it easier when you want to
use the machine again and will also prevent per-
manent damage to the engine.
• Storage
Before putting the machine away:
–  Empty the fuel tank.
–  Start the engine and run it idle until it comes to 
a halt, so that it uses up all the fuel that is left in 
the carburettor.
–  Wait for  the engine to  cool down and  remove 
the spark plug
–  Pour a teaspoon of fresh oil into the spark plug 
hole.
–  Pull the starter rope several times to deliver oil 
to the cylinder.
–  Replace the  spark  plug  with  the piston in the 
dead end upper position (visible from the spark 
plug slot when the piston is at maximum stroke).
•  Restarting work
When you wish to start using the machine again:
–  Remove the spark plug.
–  Pull  the  starter  rope  a  few  times  to  eliminate 
excess oil.
–  Check the spark plug as described in chapter 
“Checking the spark plug”.
–  Prepare the machine as indicated in the para-
graph entitled “Preparing for work”.
MAINTENANCE AND STORAGE  113
EN
115

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Stiga-SB-33-D

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stiga SB 33 D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stiga SB 33 D in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info