608726
112
Verklein
Vergroot
Pagina terug
1/408
Pagina verder
The belt (1) must go over the left shoulder towards 
the right hip. 
Double belt models
The belt (2) must be worn with:
–  the machine’s support and snap-hook coupling on 
the right side (2.1);
–  the release in front (2.2);
–  the belts cross-over on the operator’s back (2.3);
–  the buckle properly fastened on the left side (2.4).
The belts must be tensioned so that the load is evenly 
distributed on the shoulders.
USING THE MACHINE
WARNING!
When working, the ma chine
must always be rmly held in both hands, kee
-
ping the power unit on the right of the body and
the cutting group below the line of the belt.
WARNING!
Stop the engine immedia-
tely if the blade stops during sawing. Always
beware of a kickback, which could occur if a
blade encounters a solid object (logs, roots,
branches, stones, etc.). Do not touch the ground
with the blade. Kickbacks cause blade recoils
that are dicult to control, so as to cause loss
of control of the machine, compromise operator
safety and cause damage to the machine itself.
Before tackling a mowing job  for  the  rst  time  it  is 
advisable to gain the necessary  familiarity with the 
machine and the  most suitable cutting techniques, 
nding out how to wear the webbing correctly, rmly 
gripping  the  machine  and  making  the  movements 
required by the job.
Choosing the cutting device
Choose the most suitable cutting device for the job 
to be done, according to these general indications:
the  3-point  blade is  suitable  for  cutting  brush
-
wood and small shrubs up to 2 cm in diameter;
the 4-point bladeis is suitable for cutting resistant 
grass over large surfaces; 
the cutting line headcan eliminate tall grass and 
non-woody vegetation near fences, walls, founda
-
tions, pavements, around trees, etc. or  to  com-
pletely clean a particular area of the garden;
To respect people and the environment:
–  Try not to cause any disturbance.
–  Scrupulously  comply  with  local  regulations 
and provisions for the disposal of waste ma
-
terials after sawing.
–  Scrupulously  comply  with  local  regulations 
and provisions for the disposal of oils, petrol, 
damaged parts or any elements which have a 
strong impact on the environment.
WARNING!
Prolonged exposure to vi
brations can cause injuries and neurovascular
disorders (also called “Renaud’s syndrome” or
“white hand”), especially to people suering
from circulation disorders. The symptoms can
regard the hands, wrists and ngers and are
shown through loss of sensitivity, torpor,
itching, pain and discolouring of or structural
changes to the skin. These eects can be wor
-
sened by low ambient temperatures and/or by
gripping the handgrips excessively tightly. If the
symptoms occur, the length of time the machine
is used must be reduced and a doctor consulted.
WARNING!
Always wear suitable clo-
thing when using the machine. Your dealer can
provide you with all the information on the most
suitable accident-prevention devices to guaran
-
tee your safety.
USING THE WEBBING (Fig. 10)
WARNING!
The machine must al ways
be used connected to the webbing worn cor
-
rectly. Frequently check the eciency of the
quick release mechanism used to quickly free
the machine from the belts in case of danger.
The webbing must be put on before connecting the 
machine to the special coupling and the belts must 
be adjusted to suit the operator’s height and stature.
If the machine has more than one coupling hole, use 
the most favourable point for keeping the machine 
balanced when working.
Always use webbing suited to the weight of the ma
-
chine and the cutting device used
the single or double belt models can be used for 
machines weighing less than 7.5 kg tted with 
the cutting line head or 3 or 4-point blades;
–  the double belt model must be used for machines 
weighing more than 7.5 kg.
Single belt “MONO” models
EN
110 USING THE MACHINE
7.  USING THE MACHINE
112

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Stiga-SB-33-D

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stiga SB 33 D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stiga SB 33 D in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info