FUNCTIONS ：
OPERATION PROCEDURE:
1. Installs 2 pieces of 1.5V #3 batteries, then the screen will display as following “Drawing A”
and have “Bi” sound at the same time, then enter to the personal data setting and press
“MODE” button for confirmation. After that, it goes to the next step to the main menu as
“Drawing B”.
Drawing A Drawing B
2.Get access to the set-up mode of TIME/DISTANCE/CALORIES/PULSE. When you are in
each set- up mode, for example in the time set-up mode, time value is blinking, you can use
joggle wheel to adjust the value and press “MODE” for confirmation. The set-up of
DISTANCE, CALORIES & PULSE is the same.
3. With any signal been transmitted into the monitor, the value of TIME, DISTANCE,
CALORIES start to count up as Drawing C. When there is any function has been preset the
target (TIME or DISTANCE or CALORIES), the function will be counting down from the preset
to zero while the training starts. Once the target is achieved to zero, the monitor start to beep
Displays the pedaling Rotation Per Minute. The RPM and SPEED
will
switch to another display in every 6 seconds after exercise starts
1. You can use joggle wheel to set target time between 0:00 to 99:00
for count down function.
2. It can be set up by the user or accumulated automatically for
count up function.
1. You can use joggle wheel to set target distance between 0.00 to
99.50 for count down function.
2. It can be set up by the user or accumulated automatically for
count up function.
In STOP mode, press the BODY FAT button to start body fat
measurement. During measuring, user has to hold both hands on
the
handgrip. And the LCD will display “-” “--““---” “----“ for 8 seconds until
computer finish measuring. LCD will display BMI, FAT% by turn
every 3 seconds.
