680782
50
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
50
S10931-00001_Rev-D_EN
10. Connections and special functions of the motor
carriage
Resetting
1. Press the green Reset button on the motor carriage
for 15 seconds until the green status LED goes out.
Reset is performed.
10.14 Setting the DIP switches on the
motor carriage
Special functions can be set with the DIP switches on
the motor carriage.
For compliance with EN 13241-1, before initial operation,
the door type must be selected and set on the motor
carriage with the DIP switch. The factory setting of
the DIP switches is OFF, which is then applicable for
sectional doors.
NOTE
Do not use a metal object to set the DIP
switches, because this may damage the
DIP switches or the circuit board.
Use a suitable tool, for example a at
plastic object, to set the DIP switches.
DIP switch on
motor carriage
OFF
ON
1
ON
1
2
3
4
Automatic
closing function
activated
Automatic
closing function
deactivated
2
ON
1
2
3
4
Partial opening
activated/
Lighting
function
deactivated
Partial opening
deactivated/
Lighting
function
activated
3+4
ON
1
2
3
4
3
ON
1
2
3
4
4
ON
1
2
3
4
10.15 Setting automatic closing function
- defining basic values
When automatic closing is activated, the door is opened
by a pulse.
The door moves to the door OPEN end position. The
door closes automatically after the hold open time. With
the factory settings, the door also closes automatically
from the partial opening position when the automatic
closing function is activated.
WARNING
Risk of injury during automatic
closing!
Automatically closing doors can injure
people and animals in the movement
area of the door when the door is
closing. Serious injury or death may
result.
Always keep the moving door in sight.
Keep persons and animals clear of the
range of movement of the door.
Never put your hand near the door or
near moving parts when the door is
moving. In particular, do not reach into
the ceiling holder or the push arm.
Do not drive through the door until it has
opened completely.
NOTE
If the door is not in view and the operator
is actuated, objects in the movement area
of the door may be jammed and damaged.
Objects must not be in the range of
movement of the door.
INFORMATION
The door opens completely if it hits an
obstacle.
INFORMATION
Operation with automatic closing must
comply with EN 12453. This is a legal
requirement. National regulations must
be observed in non-European countries.
A photocell must be connected. Bridging
the safety inputs with jumpers is not
permitted.
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9080 pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9080 pro in de taal/talen: Engels als bijlage per email.

De handleiding is 10,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9080 pro

Sommer S 9080 pro Gebruiksaanwijzing - Nederlands - 88 pagina's

Sommer S 9080 pro Gebruiksaanwijzing - Deutsch - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info