Safety instructions
• The power cable supplied as standard may neither be shortened nor
lengthened.
• The power supply voltage must correspond to that indicated on the
operator’s rating plate.
• All devices requiring external connection must be equipped with safe
contact separation as per IEC 364-4-41, in order to isolate them from the
mains voltage supply.
• Live parts of the operator (voltage-carrying parts e.g. C-rails) may not be
connected to earth or to the live parts, or to protective conductors of
other circuits.
• IEC 364-4-41 must be observed when laying the external device conduc-
tors.
Caution!
Risk to life and limb! Remove all ropes and loops that are required
for the manual operation of the door.
Installing the slip-door safety
mechanism or release lock
• If your garage door is fitted with a slip door but not with a slip-door safety
mechanism, then you need to have one installed (see “Accessories”).
• If your door does not have a slip-door and your garage does not have
a separate entrance, then install a release lock or Bowden cable for
operator release from the outside (see “Accessories” instructions).
Scope of supply
• The scope of supply can vary according to the type of operator supplied.
Item Component
1. Control housing 1
(including push-button, control,
traffic light control and transformer)
2. Trolley 1
3. C-rails (coated) 2
4. Slide-on module (coated) 1
5. Switch trigger "H" 1
6. Switch trigger "V" 1
7. Chain (marathon) 1
8. Connecting rod 1
9. Door hinge 1
10. Suspension bracket 1
11. Installation and operating manual 1
12. Assembly kit (sprint/marathon) 1
13. Slide-in module with control line 1
(length 5,000 mm)
