621561
79
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
79
v1.06
Admin and Installation Guide M700, M300 Description of Settings
Setting Description
MAC address The media access control (MAC) address is a unique identier assigned by the
manufacturer. Printed on device's label and on Home page of web interface.
IP address The Internet Protocol address assigned by the network the base station is
located in.
IP status Current base station status in the SME network.
This unit: Indicates that you are looking at this base station's web interface.
Connected: The base station is online in the network.
Connection lost: The connection to the base station has been lost.
DECT sync source The drop-down menu contains the RPNs of each of the currently connected
base stations followed (in parentheses) by the strength of the respective radio
signal (RSSI) in dBm, as received by the base station whose web interface you
are currently accessing. The maximum number of multicell chain levels is 12.
When the DECT system setting Auto congure DECT sync source tree is
set to "enabled", the sync source tree will be generated automatically.
When the setting is "disabled", the sync source tree must be congured
manually by selecting each base station's sync source from the drop-
down menu.
The visible option shows which sync source each of the base stations in the
DECT chain is currently using. If you select a dierent option, the chain must
be rebooted. Options:
Select as primary: This option is visible when the base station is selected
as the primary. Select from the drop-down menu of a secondary base
station to make that base station the primary.
Primar y:RPNxx (-xxdBm): This option is visible when the base station is
a secondary level base station whose sync source is the primary.
Example: Primary:RPN00 (-72dBm)
Levelx: RPNxx (-xxdBm): This option is visible when the base station is a
secondary level base station whose sync source is another secondary
level base station.
Example: Level1:RPN04 (-68dBm)
(any) R PN: Indicates a base station that is not synchronized to any other base
station.
DECT property Base station characteristics in connection to the current multi cell network.
Possible output(s):
Primary: Primary base station all other nodes in the chain synchronize to.
Locked: The base station is currently synchronized and locked to the
primary.
Searching: The base station is in the process of locating to a DECT sync
source.
Free Running: A locked base station that suddenly lost synchronization to
the primary.
Cell empty: No current connection information from base station.
Assisted lock: Base station has lost DECT sync source, and Ethernet is
used for synchronization.
Sync. Lost: Handset has an active DECT connection with the base station
but the base station has lost connection to DECT sync source. The base
station will continue to work as long as the call is active, then go into search
mode when the call is terminated.
Base station name Base station name that was assigned to the base station in the Management
settings and that also appears at the top of its web interface, within the base
station group, and in the DECT chain of a multicell installation.
79

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Snom M300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Snom M300 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Snom M300

Snom M300 Gebruiksaanwijzing - Deutsch - 82 pagina's

Snom M300 Gebruiksaanwijzing - English - 44 pagina's

Snom M300 Gebruiksaanwijzing - English - 38 pagina's

Snom M300 Gebruiksaanwijzing - English - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info