755697
33
Verklein
Vergroot
Pagina terug
1/129
Pagina verder
31
GB
NOTE: above all, the ideal speed depends
on the consistency of the material being
blended. The more liquid the contents, the
faster you can blend them.
9.3 Pulse function
NOTE: the pulse function only works if the
speed control|11 is set to at least 1.
By pressing the PULSE|12 button, you
can briefly increase the speed to the
highest setting (10).
Use the pulse function to shred small
quantities of e.g. nuts, herbs or onions
in the blender jug|5.
9.4 Overheating protection
The device has an overheating protection
system. If the motor becomes too hot, the de-
vice automatically switches itself off:
1. Switch off the device.
2. Pull out the mains plug|13.
3. Allow the device to cool down to room
temperature.
When the device has cooled down suffi-
ciently, it can be switched on again.
10. Dismantling the de-
vice
Removing the blender jug
1. Rotate the blender jug|5 anticlockwise
slightly, and lift it off upwards.
2. Replace the cover|8.
Removing the lid of the blender
jug
3. Rotate the lid|2 anticlockwise until you
can remove it.
4. Rotate the lid of the refill opening|1 anti-
clockwise and remove it.
Lifting up the drive arm
5. Turn the unlocking lever|10 to point up-
wards (in the direction of the arrow)
and lift up the drive arm|22 until it
clicks into place and the unlocking le-
ver|10 snaps back into its locked posi-
tion.
Removing the mixing tool
6. Press the mixing tool upwards slightly
and rotate it clockwise until it can be re-
moved from the axle|23.
Removing the splash guard
7. Rotate the splash guard|21 anticlock-
wise until it can be removed.
Removing the mixing bowl
8. Rotate the mixing bowl|15 anticlock-
wise until it can be removed.
Lowering the drive arm
9. Rotate the unlocking lever|10 upwards
in the direction of the arrow.
10.Move the drive arm|22 all the way
down. The unlocking lever|10 jumps
back to the vertically locked position.
11. Cleaning and servic-
ing the device
DANGER! Risk of electric shock!
~Disconnect the mains plug|13 from the
wall socket before each cleaning.
~Never immerse the base unit|19 in wa-
ter. DANGER! Risk of injury from
cutting!
~Please remember that the blades|6 of
the blender jug|5 are very sharp. Never
touch the blades|6 with your bare
hands, to avoid cuts.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest IAN 307876 SKMP 1300 C2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest IAN 307876 SKMP 1300 C2 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info