Hand Blender
Dear Customer
Before using the appliance, the user must
read the following instructions carefully.
Familiarisation
1. Power cord with plug
2. Hanging loop
3. Operating button I
4. Operating button II
5. Drive unit
6. Blender unit
7. Blade unit
8. Blender jar
9. Whisk attachment
Connection to the mains supply
Make sure that the supply voltage corresponds
with the voltage marked on the rating label of
the blender. is product complies with all
binding CE labelling directives.
Important safety instructions
Before the appliance is used, the main z
body as well as any attachment tted
should be checked thoroughly for any
defects. Should the appliance, for instance,
have been dropped onto a hard surface, it
must not be used any longer: even invisible
damage may have adverse e ects on the
operational safety of the appliance.
e power cord should be regularly z
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive z
force has been used to pull the power
cord. Damage cannot always be detected
from the outside; the entire unit should
therefore be checked by a quali ed
technician before it is used again.
is appliance is not intended for use z
by any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning
the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure z
that they do not play with the appliance.
Caution: z Keep any packaging materials
well away from children, as they are
a potential source of danger e.g. from
su ocation.
Great care is necessary when using this z
appliance, especially near children. Do
not leave the appliance unattended while
connected. Always remove the plug from
the wall socket, even if you leave the room
only for a short while.
Ensure that children do not operate the z
appliance without supervision.
Do not allow the unit or its power cord to z
touch hot surfaces or to come into contact
with any heat sources.
Always switch the appliance o and z
remove the plug from the wall socket
before tting, removing or cleaning the
blender unit or the whisk attachment.
e blade is extremely sharp. To prevent z
injuries, take special care when handling
these parts.
A er switching o , always wait until the z
motor has come to a complete standstill.
Do not touch any moving parts.
Always remove the plug from the wall z
socket a er use, and also
in case of any malfunction -
during cleaning of the appliance. -
During operation, the unit should be z
placed on a scratch-resistant surface.
No responsibility is accepted if damage z
results from improper use, or if these
instructions are not complied with.
is appliance is intended for domestic use z
only and not for commercial applications.
In order to comply with safety regulations z
and to avoid hazards, repairs of electrical
appliances must be carried out by quali ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
7
