12
∙ Starting the brewing cycle:
Insert the plug into a suitable wall outlet
and use the On/Off switch to turn the coffee
maker on. The fi ltration cycle starts and the
water passes through the fi lter.
∙ Removing the glass carafe:
Wait until all the water has passed through
the fi lter before the carafe is removed from
the appliance.
∙ Keeping the coffee warm:
The coffee may be kept warm inside the
carafe by leaving it standing on the hot-plate.
The plate is kept hot for around 35 minutes
after brewing is complete.
∙ Interrupting the brewing/keeping-warm
cycle:
To interrupt the brewing cycle, or if the
keeping-warm function is not needed, use
the On/Off switch to turn the appliance off
(position ‘0’).
∙ Switching off the coffee maker:
Once brewing/keeping-warm is complete,
use the On/Off switch to turn the appliance
off (position ‘0’) and remove the plug from
the wall socket.
Descaling
∙ Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
appliances using hot water need
descaling (i.e. removal of lime deposits)
on a regular basis to warrant proper
functioning.
∙ Any warranty claim will be null and
void if the appliance malfunctions
because of insuffi cient descaling.
∙ A lengthening of the brewing time and
increased noise during brewing indicate
that descaling of the coffee maker has
become necessary.
∙ An excessive build-up of lime deposits is
very diffi cult to remove, even when strong
descaling agents are used. It may also
cause the brewing system to leak. We
therefore strongly recommend descaling
the appliance after each thirty to forty
brewing cycles. For descaling, a vinegar
solution may be used as follows:
∙ Mix 40 ml of vinegar essence with the
indicated maximum amount of cold
water.
∙ Pour the descaling solution into the
water container, insert a paper fi lter into
the fi lter holder without adding any
ground coffee as described in section
Making coffee, and let the appliance
run through one fi ltration cycle. Repeat
the procedure if necessary. During
descaling, ensure suffi cient ventilation
and do not inhale any vinegar vapours.
∙ To clean the appliance after descaling,
let it run through 2-3 fi ltration cycles
using clean water only.
∙ Do not pour descalers down enamel
sinks.
Cleaning and care
∙ Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
∙ To avoid the risk of electric shock, do
not clean the appliance with liquids or
immerse it; do not clean under running
tap water. The appliance may be cleaned
with a slightly damp cloth, using a mild
detergent. Wipe dry afterwards.
∙ Do not use abrasives or harsh cleaning
solutions.
∙ To remove the used coffee grounds, open
the swing-out fi lter and lift out and dispose
of the paper fi lter and the grounds (as a
