759115

Sencor SWK 7000 Handleiding

6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
- 6 - 12/2020
Copyright © 2020, Fast ČR, a.s.
EN Electric kettle
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ Carefully unpack the appliance and take care not to throw away any part of
the packaging before you find all its parts. We recommend saving the original
cardboard box, packaging material, purchase receipt and responsibility statement
of the vendor or warranty card for at least the duration of the legal liability
for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION
A1 Lid
A2 Spout with filtration strainer
A3 Water level mark
A4 Base with acentral connector
A5 Power cord groove
A6 Open lid button
A7 Handle
A8 Backlit On/Off switch
A9 Power cord
BEFORE FIRST USE
■ Remove all wrapping material from the electric kettle and its base stand.
■ Fill the kettle with clean water up to its maximum water mark (max). Boil the water
and empty the contents of the kettle. Repeat this process 2 to 3 times. To boil water,
proceed according to the instructions in chapter Operation.
OPERATION
Attention:
The electric kettle is intended only for heating water. Never heat
any other liquids or substance in it.
■ Set the required power cord length and push it into the groove in the base stand.
Place the base stand on astable, even and clean surface.
■ Fill the kettle with the required amount of water. You may fill it through the spout
or through the opening after lifting the lid. To open the lid, press button A6. The
water level must reach at least the minimum mark (min) but must not exceed the
maximum mark (max). After filling the kettle, properly close the lid.
Attention:
Never fill the kettle when it is placed on the base stand.
■ Place the kettle on the base stand. Insert the power plug into apower socket and
push down on the switch A8 to start the kettle. The backlight of the switch will be lit.
Attention:
Never start the kettle empty without water. The incorrect use of
the kettle may negatively affect its working order and lifetime.
■ When the water starts to boil, the kettle will turn off automatically and the backlight
will turn off.
Note:
The kettle can be stopped at any time by setting the switch A8 up (off).
■ Pour the boiled water into aprepared container, cup or mug. When carrying it, hold
the kettle upright, particularly when it is filled all the way up to the maximum mark.
■ If you wish to fill the kettle again and start heating immediately after pouring in
the water, wait approximately 30–60 seconds. When opening the lid, be especially
careful to avoid scalding yourself with boiling water or steam.
■ After you finish using it, disconnect the power cord from the power socket. Empty
the kettle and allow it to cool down.
PROTECTION AGAINST BOILING WITHOUT WATER
■ If you accidentally turn on the kettle without water, the thermostat will, after
reaching a certain temperature, interrupt the electric circuit. The switch A8 will
return to the raised "off" position and the backlight will turn off. The kettle can be
used again after several minutes, once the heating bottom has cooled down.
Attention:
Even though the kettle is equipped with protection against boiling
without water, do not turn it on when empty. The incorrect use of
the kettle may negatively affect its working order and lifetime.
CLEANING AND MAINTENANCE
Attention:
Prior to any cleaning or maintenance, always disconnect the base
stand from the power socket and allow the kettle to cool down.
Do not wash the kettle, its base stand or power cord under
running water and do not submerge them in water or another
liquid.
■ To clean the external parts of the kettle, use adry cloth or acloth dipped in aweak
solution of neutral kitchen detergent. Never use solvents, cleaning products with an
abrasive effect, etc. After washing, wipe the surface with aclean, lightly dampened
cloth and then wipe dry.
■ Wipe the internal parts of the kettle using asoft sponge or clean cloth dipped in
clean warm water. Do not use detergents or any other chemical agents on the
internal parts. After cleaning the kettle, rinse it out several times with clean water.
■ To clean the base stand, use only adry cloth.
Cleaning the filtration strainer
■ The removable filtration strainer serves to capture limescale, preventing it from
getting into the cup together with the water. Regularly clean the filter under running
water using afine nylon brush or submerge it for several hours into avinegar - water
solution (recommended dilution ratio 1:2). After applying the solution, rinse the
filter under clean running water.
Removing limescale deposits
■ During normal use, substances contained in water accumulate on the appliance to
form so-called limescale deposits. These may negatively affect the lifetime of the
kettle and ruin the taste and appearance of your beverage, so it is important to
regularly remove them based on how frequently the kettle is used.
■ When using the kettle at afrequency of 3 to 5 times per day, we recommend to
remove water scale deposits:
– once per month in areas with hard and very hard water;
– once every two to three months in areas with soft and medium hard water.
■ Limescale deposits can be cleaned away using standard available limescale removal
products (according to the manufacturer'sinstructions) or use:
– 8% white vinegar, generally available in stores. Fill the kettle with 1 litre of water
and¼ litre of vinegar. Bring the solution to aboil and leave it to act in the kettle
for 2 hours. Then empty the kettle and before further use, boil clean water in it
four to five times.
– citric acid. Boil 1 l of water in the kettle, into the boiled water, add 30 g of citric
acid and allow the solution to act for about 30 minutes. Then empty the kettle and
before further use, boil clean water in it four to five times.
TECHNICAL SPECIFICATIONS
Rated voltage range ............................................................................................................ 220−240 V
Rated frequency........................................................................................................................50/60 Hz
Rated power input ........................................................................................................ 1,850-2,200 W
Volume .................................................................................................................................................. 1.7 l
Weight .............................................................................................................................................1.05 kg
Changes to text and technical parameters are reserved.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SWK 7000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SWK 7000 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info