758532
7
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
04/2017
- 7 -
Copyright © 2017, Fast ČR, a.s.
EN Food Processor
User'smanual
Prior to using this appliance, please read the users manual thoroughly, even
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described in
this user’smanual. Keep this usersmanual in asafe place where it can be easily
retrieved for future use.
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty card
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the
appliance in the original box from the manufacturer.
DESCRIPTION OF THE FOOD PROCESSOR
A1 Kneading hook
A2 Balloon whisk
A3 A-shaped beater
A4 5.5-litre stainless steel bowl
A5 Base unit
A6 Removable cover of the front meat
grinder attachment hub
A7 Removable cover of the top
blender attachment hub
A8 Tilt-out multi-function head
A9 Bowl cover with ahole for adding
ingredients
A10 Hub for attaching attachments
A1A3
A11 Multi-function head release lock
A12 Speed control knob
serves to set speeds 1 to 10, sets
the pulse level and turns off the
appliance.
A13 Suction cups
provide stability to the appliance
during operation.
DESCRIPTION OF MEAT GRINDER ACCESSORIES
B1 Pusher
B2 Hopper
B3 Feed tube
B4 Grinding chamber
B5 Screw shaft
B6 Grinding blade
B7 Screw ring
B8 Fine grinding plate
B9 Coarse grinding plate
B10 Separator
B11 Thin sausage stuffer attachment
B12 Thick sausage stuffer attachment
DESCRIPTION OF THE BLENDER ACCESSORIES
C1 Inner cap of the blending jar
C2 Outer lid of the blending jar with
ahole for adding ingredients
C3 Glass blending jar with 1.5 l
capacity
C4 Handle
C5 Blade assembly
is an integral part of the blending
jar.
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all accessory parts that are intended to come into contact
with food using warm water and aneutral kitchen detergent. Then rinse them
under clean running water and thoroughly wipe dry with afine wiping cloth or
allow them to dry naturally. After washing and drying, we recommend to coat
the grinding blade B6 and the grinding plates B8 andB9 with cooking oil.
3. Do not submerge the food processor or its power cord in water or any other
liquids.
Attention:
The metal parts of the meat grinder and attachments A1A3 are not
intended for washing in a dishwasher. Other removable parts may be
washed in adishwasher.
BEATING, WHIPPING AND KNEADING
SELECTING ATTACHMENT TYPES
Attachment type Purpose of use
Beater A3 It is used for beating light and medium heavy yeast-free
doughs, for preparing sauces, creams, fillings, etc. Do not
use it for kneading heavy doughs.
Balloon whisk A2 It is used for whisking whole eggs or egg whites, whipped
cream, foamy creams, etc. Do not use it for beating or
kneading doughs.
Kneading hook A1 It is used for kneading various types of doughs including
heavy and thick doughs such as for example bread dough,
pizza dough, fresh pastry doughs, etc.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
Before you start assembling or disassembling the food processor, check that it
is turned off and disconnected from the power socket.
1. Inserting the bowl
1.1 Place the food processor on an even, dry surface, for example on akitchen
countertop.
1.2 Use the lock A11 to release the multi-function head A8 and tilt it out all the
way. The locked status of the multi-function head A8 in the open position is
indicated by the lock A11 returning to the default position.
1.3 Insert the stainless steel bowl A4 into the base unit A5 and secure it in place
by turning it clockwise. When the bowl A4 is properly attached, it cannot be
separately lifted out of the base unit A5.
2. Mounting attachments and the cover
2.1 When attaching an attachment, the multi-function head A8 must be locked
in the open position, see point 1.2 in the previous chapter. Attach one of the
attachments on to the shaft on the underside of the multi-function head A8
so that the shaft fits into the hole on the attachment. Push the attachment
towards the multi-function head A8 and turn it anticlockwise to secure it in
place. Lightly pull the attachment downwards with one hand to check that it is
properly attached.
2.2 Place the ingredients that you wish to process into the bowl A4. Release the lock
A11 and tilt the multi-function head A8 to the horizontal position. After tilting
down the multi-function head A8, release the lock A11. The locked status of the
multi-function head A8 in the tilted down work position is indicated by the lock
A11 returning to the default position. This is accompanied by an audible click.
2.3 Place the cover A9 on to the bowl A4.
3. Disassembly
3.1 Remove the cover A9. Release the lock A11 and tilt out the multi-function head
A8 all the way. After tilting out the multi-function head A8, release the lock A11.
Locking of the multi-function head A8 inthe open open position is indicated
by the lock A11 returning to the default position, which is accompanied by an
audible click.
3.2 Push the attachment gently towards the multi-function head 8. Then rotate it
clockwise until it is released from the shaft and take it off. Turn the bowl A4
anticlockwise and remove it from the base unit A5. Move the arm A8 back to
the horizontal position.
USING THE FOOD PROCESSOR
1. Select the right type of attachment based on its intended use and assemble
the appliance according to the instructions in the chapter Assembling and
disassembling the food processor. Put the ingredients into the bowl A4 before
tilting the multi-function head A8 to the horizontal position.
Attention:
In asingle batch, it is possible to process no more than 2.2 litres of light
dough or 0.8 litres of thick, heavy dough. The maximum number of egg
whites that can be whisked at once is 12.
If an insufficient amount of ingredients are put in the bowl A4 (less than
0.3 litres of dough), then they may not be perfectly processed.
2. Make sure that the speed control knob A12 is set to position 0 (off) and that the
multi-function head A8 is tilted down in the horizontal position. The cover A7
must be properly attached to the multi-function head A8. Otherwise, the food
processor will not start. Connect the power cord to apower socket.
3. Set the required speed using the speed control knob A12. Gradually turn the
speed control knob A12 clockwise to increase the speed, turning it in the
opposite direction will reduce the speed. To initially stir in the ingredients, first
set alower speed and then adjust it as required. Electronic speed regulation
ensures that the set speed will be maintained under various loads. While it is
running, ingredients may be added into the bowl A4 through the hole in the
cover A9.
4. The pulse mode is used for increasing the speed to maximum for ashort time.
To activate the pulse mode, turn the speed control knob A12 to the ”P” position
and to ensure continuous operation hold it down in this position. As soon as
you release the speed control knob A12, it will automatically return to position
0 (off).
5. If it is necessary to wipe ingredients off the inside of the mixing bowl A4 and
the attachment, first turn off the food processor by setting the speed control
knob A12 to position 0 (off) and then disconnect it from the power socket.
Wait until the rotating parts come to a stop and only then scrape away the
ingredients with aspatula.
6. After you have finished using the appliance, set the speed control knob A12 to
position 0 (off) and disconnect the power cord from the power socket.
7. Wait until the rotating parts come to a stop and disassemble the food
processor according to the instructions included in chapter Assembling and
disassembling the food processor. Use asoft plastic spatula to empty out the
contents of the bowl A4.
8. Clean out the food processor after each use according to the instructions in
chapter Cleaning and maintenance.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor STM 3778 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor STM 3778 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sencor STM 3778

Sencor STM 3778 Gebruiksaanwijzing - Nederlands - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info