225If and when
What to do first
Certain steps must be taken before repairing a tyre.
–If you have a flat tyre or puncture, park the vehicle as far away
from the flow of traffic as possible.
–Apply the handbrake firmly.
–Engage first gear, or put the selector lever to position P.
–All occupants should leave the vehicle. They should wait in a
safe area (for instance behind the roadside crash barrier).
–Check whether a repair is possible using the Tyre Mobility Sys-
tem “General information and safety notes.”
–Unscrew inflation cap from the affected wheel.
–Take the tyre repair kit out of the luggage compartment.
WARNING
Switch on the hazard warning lights and place the warning triangles in
position. This is for your own safety and also warns other road users.
CAUTION
Take special care if you have to repair a tyre on a slope.
Note
●Please observe legal requirements when doing so.
●Remember to replace the sealing product as soon as possible.
Tyre repair
The following sections describe the procedures for repairing
a tyre.
Using the sealing product
–The instructions on the container give detailed information on
how to use the sealing product.
Inflating the tyre.
–Remove the air compressor and hose from the container.
–Screw the retaining nut onto the valve.
–Plug the compressor cable into a 12 volt power socket.
–Turn on compressor and monitor the pressure shown on the
pressure gauge.
Completing the repair
–Remove the compressor hose from the valve.
–Fit the valve cap.
–Unplug the compressor from the socket.
–Return all tools to their proper storing location.
Note
The compressor should never be allowed to run for longer than 6 minutes.
Safety First Operating Instructions Practical Tips Technical Specifications
