781891
21
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
21 І 36
8.4.Connection for dust extractor (g. 1, 5, 6)
m WARNING! Harmfull noxious gases may be gen-
erated when e.g. lead-containing paint is processed.
These gases entail a risk for the operator and the per-
sons in the vicinity! Therefore only use the power tool
in combination with a dust extraction unit, and protect
yourself and other persons in the working area with
additional suitable personal protective equipment!
When working with this power tool, a Iot of dust is
generated. The dust extraction unit is very useful if
you want to keep your workplace clean. lt is possible
to combine the extraction system or a vacuum cleaner
with the extraction hose (14) which is connected to
the adapter for dust extraction.
Insert the hose adaptor (15) into the connection for
dust extraction (10 or 12) and lock it by twisting as
shown in g. 5 and 6.
Note: Connect your tool to an extraction unit or vac-
uum cleaner. This will provide excellent extraction of
dust and debris.
m ATTENTION! For health safety reasons it is im-
perative that you use a dust extractor.
Note: Make sure that the vacuum cleaner is suitable
for being used together with a power tool.
8.5. Function of the brushed edge (g.7)
The grinding head of this power tool is enclosed by
a brush edge (A) which offers the following two ad-
vantages:
a) The brush edge (A) protrudes beyond the grind-
ing plate (1) and touches the surface to be pro-
cessed rst. Thus, the grinding plate is posi-
tioned in parallel to the working area before the
insertion tool comes in contact with the surface
which is to be processed. This is to prevent the
formation of sickle-shaped recesses caused by
the grinding disk edge.
b) Furthermore, the brush edge (A) prevents the
generation of excessive dust. Dust generated du
ring the grinding process is not transported to-
wards the outside but is removed by the extraction
system. Make sure before each operation with
this power tool that the brush edge (A) is not dam-
aged. Have it replaced if there is damage or wear.
8.6. Connection to the power supply
1. Make sure that the power tool is switched off.
2. Plug the power plug into a correctly installed
socket which complies with the requirements
specied in the technical data.
3. Your power tool is now ready for operation.
8.7. Switching on/off (g.8)
To switch on:
Push the on/ off switch (13)
Continuous operation: (g.8)
Secure the on/off switch (13) with the locking knob (6).
To switch off:
Press the on/off switch (13) briey and let go.
8.8. Adjusting the oscillation rate (g.9)
Before you start working, adjust the oscillation rate
according to the application. Use a low number of os-
cillations for rough grinding, increase the oscillation
rate for ne work.
Rotate the adjustment wheel (5) to adjust the
oscillation rate. Turn the wheel clockwise to reduce
the oscillation rate (Fig.9).
Turn the wheel counter-clockwise to increase the
oscillation rate (Fig. 9).
Note: The insertion tool moves for a short while after
having it switched off. Do not put aside the power tool
until the insertion tool has come to a complete halt.
8.9. Grinding
1. Attach an appropriate abrasive sheet (16) and
select the corresponding speed.
2. Hold the power tool securely at the handle sur-
faces (7, 2) and switch it on as described.
3. Wait until the insertion tool has reached its full
operating speed.
4. Hold the grinding plate (1) as parallelas possi-
ble to the wall, and touch the surface tobe pro-
cessed with the brush edge (A) rst.
5. Apply some pressure to the grinding head (1)
such that the insertion tool touches the surface
to be processed.
6. Constantly move the power tool over the surface.
Note: lf you want to avoid irregular grinding results,
do not keep the power tool at one spot for too long.
7. Lift the grinding plate (1) from the surface to be
processed before switching off the power tool.
8. Do not put aside the power tool until the insertion
tool has come to a complete halt.
8.10. After use
1. Switch off the power tool as described, discon-
nect it from the power supply and Iet it cool down.
2. Clean and maintain the power tool as described
under point 10, and store it carefully.
LED - light (g.10)
To ensure a well lit workplace, use the LED-light (4)
if necessary.
Press the switch (a) to switch ON/OFF the LED-light (4).
Ceiling grinding (g.11)
For working in ceiling area, x the grinding head with
a cotter pin (C) (included) as shown in gure 11.
9. Electrical connection
The electrical motor installed is connected and
ready for operation. The connection complies with
the applicable VDE and DIN provisions. The custom-
ers mains connection as well as the extension ca-
ble used must also comply with these regulations.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach WDS 999 Kraft Werkzeuge bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach WDS 999 Kraft Werkzeuge in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2.29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info