781891
20
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
20 І 36
to the transport company which was used to deliver
the power tool.
Avoid long supply lines (extension cables).
Do not operate the power tool in a damp or wet room.
The power tool may only be operated in suitable
rooms (well ventilated).
8. Attachment and operation
m IMPORTANT!
You must fully assemble the appliance before us-
ing it for the rst time!
m WARNING!
Neither power tools nor packaging materials are
toys! Children must not play with plastic bags,
foils and small parts! Danger of swallowing and
suffocation!
m Before you connect the equipment to the mains
supply make sure that the data on the rating plate are
identical to the mains data.
m WARNING! Always pull the power plug before
making adjustments to the equipment.
8.1. Installation (g.1-3)
-Fold the front and back part together. And then
tighten the wing nut (3).
Fitting the telescopic extension (g. 4)
Insert the telescopic extension (11) into the connec-
tion for the telescopic extension (12) and lock it by
twisting as shown in Fig. 4.
Note: Adjust the Telescopic Plasterboard Sander
with the telescopic extension (11) so that you can
work with it most comfortably. The machine can also
be used without telescopic extension.
8.2. Selecting the right abrasive paper
1. The grain size of the sandpaper is specied on
its rear side. The smaller the specied number,
the coarser the graining.
2. Use sandpaper with coarse grain for rough grind-
ing, and sandpaper with ne grain for nishing.
We recornrnend sandpapers with aluminium ox-
ide, silicon carbide or other synthetic abrasives.
3. lf you can chose between sandpapers with dif-
ferent graining, you should start with coarse
graining sandpaper and complete the grinding
process with the nest possible graining. Thus
you will get good and smooth grinding results.
8.3. Attaching and replacing the sanding paper
Apply the sandpaper (16) to the grinding plate (1) us-
ing the Velcro strip mechanism.
1. Align the sandpaper (16) with the grinding plate
(1) and press it on evenly.
2. PuII the sandpaper (16) off the grinding plate
(1) and replace it with a new one or another one
(Fig.7).
6. Technical data
Mains connection 230-240 V~ 50Hz
Motor rating W 710
Operating mode S1
Nominal speed
(oscillation rate) n 700-1700 min-1
Spindle size M 14
Grinding disc diameter Ø 225 mm
Abrasive paper diameter Ø 225 mm
Protection class II /
Weight in kg ca. 4,5 kg
Sound pressure Ievel LpA 91 dB(A)
Sound power Ievel LWA 102 dB(A)
Uncertainty K (KpA / KWA) 3 dB(A)
Hand-Arm-Vibration
When grinding with abra-
sive sheets,DS 3,24 m/s²
Uncertainty K 1,5 m/s²
The specied hand-arm vibration value is based on
grinding with an abrasive sheet. Different applications
may result in different values.
The noise and vibration values were determined ac-
cording to EN 60745-1 and EN 60745-2-3.
The specied vibration value was measured an the
basis of a standard test method and can be used to
compare any kind of power tools.
The specied vibration value can also be used for the
initial evaluation of exposure.
m WARNING! Depending on how you use the
power tool, the actual vibration values may
deviate from the specied values!
Take measures to protect yourself against
vibrations!
Make sure to take into account the entire work
process, i.e. also times when the power tool
is operated without Ioad or switched off!
Appropriate measures include the regular
maintenance and care of the power tool and its
attachments, keeping your hands warm, regular
breaks and well planned work processes!
Wear hearing protection.
The effects of noise can cause a loss of hearing.
7. Before starting the equipment
Before you connect the equipment to the mains sup-
ply make sure that the data on the rating plate are
identical to the mains data.
Check the equipment for damage which may have
occurred in transit. Report any damage immediately
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach WDS 999 Kraft Werkzeuge bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach WDS 999 Kraft Werkzeuge in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2.29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info