781891
19
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
19 І 36
e) Do not use chains or toothed chain or toothed
saw blade. Such tools often cause a kickback or
loss of control of the power tool.
Safety notes regarding grinding with sandpaper
a) Do not use oversized abrasive sheets; al-
ways observe the manufacturer‘s specica-
tions for abrasive sheet dimensions.
Abrasive sheets protruding the grinding plate
may cause injury or result in the blocking or tear-
ing apart of the abrasive sheet or in kickbacks.
Additional safety notes
a) Connect a vacuum cleaner to the supplied
adapter before starting your operations.
b) Attention! Keep away grinding dust from open
Iire. Dust may be explosive.
c) Always wear goggles and a dust mask when
grinding, in particular du ring overhead work
and when processing critical materials!
When grinding certain materials (e .g.lead paint,
certain types of wood and metaI) harmful or nox-
ious dust may be generated. Touching or breath-
ing in such dust may imply risks for the operator
or people in the vicinity.
Notes regarding vibration and noise emissions
Reduce noise emissions and vibrations to a mini-
mum!
1. Only use power tools which are free of defects.
2. Maintain and clean the power tool on a regular
basis.
3. Adjust your way of working to the power tool.
4. Do not overload your power tool.
5. Have your power tool inspected, if necessary.
6. Switch off the power tool when it is not in use.
Remaining risks
Even if you use this power tool in compliance with the
regulations, there are still remaining risks. The follow-
ing risks may occur due to the type and design of the
power tool:
a) Damage caused to your health resulting from
hand/arm vibrations if the power tool is used over
a Ionger period of time or if it is not properly used
and maintained.
b) Injury and damage to property caused by ying
off insertion tools which are unexpectedly ex-
pelled from the power tool due to sudden dam-
age, wear or incorrect insertion.
c) Burns and cuts if the insertion tools are touched
directly after use and/or with your bare hands.
m WARNING! This electric tool generates an
electromagnetic eld during operation. This eld
can impair active or passive medical implants
under certain conditions. In order to prevent the
risk of serious or deadly injuries, we recommend
that persons with medical implants consult with
their physician and the manufacturer of the medical
implant prior to operating the electric tool.
m) Switch oft the power tool while you carry it
around.
Your clothes may be trapped when unintentionally
getting in contact with the rotating insertion tool
and the insertion tool may penetrate your body.
n) The ventilation slots of your power tool must
be cleaned on a regular basis.
The motor fan sucks in dust, and the accumula-
tion of metal dust may cause electrical risks.
o) Do not use the power tool in the vicinity of
inammable materials.
Sparks may ignite these materials.
p) Do not use insertion tools which require liq-
uid coolants.
Using water or other liquid coolants may cause
electric shock.
Further safety notes for all applications &
kickback
A kickback is the sudden reaction caused by rotating in-
sertion tools such as a grinding disk, grinding plate, wire
brush, etc. which has got caught or which blocks. Getting
caught or blocking results in the immediate stop of the
rotating insertion tool. This accelerates the uncontrolled
power tool against the rotary direction of the insertion tool.
lf for example a grinding disk gets caught or blocks
in the work piece, the edge of the grinding disk which
penetrates the work piece may get caught, the grind-
ing disk will make a sudden movement or cause a
kickback. As a result, the grinding disk moves towards
the operator or away from the operator, depending on
the rotary direction of the disk when it blocks. This
may also cause the fracture of grinding disks.
Kickbacks are the result of the improper or incorrect
use of power tools.
Kickbacks can be avoided when observing the follow-
ing precautionary measures.
a) Hold the power tool rmly in your hands and bring
your body and arms in a position which allows
you to adequately react to kickback forces. Al-
ways use the additional handle, if available. This
ensures you the utmost control of kickback forc-
es or reaction torques when starting your power
tool. When taking appropriate precautions, the
operator is in the position to control kickback and
reaction forces.
b) Keep your hands away from rotating insertion
tools. The insertion tool may move over your
hand in the event of a kickback.
c) Keep your body away from the area where the
power tool may move in the event of a kickback.
Kickbacks always move the power tool in op-
posite direction to the movement of the grinding
disk at the spot where it blocks.
d) Corners, sharp edges, etc. must be processed
with special care. Make sure that the insertion
tool does not bounce back from or get trapped
on the work piece. The rotating insertion tool
tends to jam in corners, at sharp edges or when
it bounces back. This may cause the loss of con-
trol or a kickback.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach WDS 999 Kraft Werkzeuge bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach WDS 999 Kraft Werkzeuge in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2.29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info