The alarm itself is not enabled for five minutes after selection. However, in five
minutes, the characters and backlighting on the LCD display window goes out and only
the [FOG] key and On/Off & Dimmer Control (to Off) are operable on the RAY 430.
The RAY 430 will appear to be OFE In this condition the burglar alarm will only sound
if the ON signal from the external alarm sensor connected to the ALARM is tripped.
Clearing the ALARM mode
To disable the Burglar alarm mode, press the [FOG] key or turn off the RAY 430 by
rotating the On/Off & Dimmer control knob fully counterclockwise.
3.3.6 Aux Mode
If the audio output line from a radiotelephone equipment, cassette deck, or
entertainment receiver is connected to the AUX terminals 1 and 2, the output signals of
such units can be amplified through desired speaker stations by the RAY 430.
1. Press the [AUX] mode key which will enable the auxiliary mode.
2. Press the desired speaker station key to select the specific station ([IC 1/2], [IC 3/4]).
3. Adjust the HAIL volume for the desired listening level.
3—13