Handleiding Philco CDV210HH8 (pagina 8 van 26) (Engels)

501682

Verklein

Vergroot

Pagina terug

1/26

Pagina verder

–

Setup

Turn on the TV and set it to channel 3.

• If channel 3 has been already occupied for broadcasting,

see “RF Output Channel” section on page 6.

Select your language when turning this unit on for the first time.

Then press [

B] to go to next step.

Press [B] to start Auto Set Up.

STANDBY-ON

Press [MENU] to select “CHANNEL SET UP”.

Then press [B] to go to next step.

Select “MANUAL SET UP”.

Then press [B] to go to next step.

Select the channel to be added or deleted.

Select “ADD” or “DELETE”.

To exit the menu

To Preset the Channel Again

1) Press [MENU] until the main menu appears.

Select “CHANNEL SET UP” by using

[K//L]

, then press

[B]

Select “AUTO SET UP” by using [K//L], then press [B]. After scan-

ning, the tuner stops on the lowest memorized channel.

To Change the On-Screen Language

Press

[MENU]

until the main menu appears.

2) Select “LANGUAGE SELECT” by using [K/L], then

press [B].

3) Select “ENGLISH” , “FRANCAIS” or “ESPAÑOL” by using [K/

L] then press [CLEAR/C.RESET].

To Select a Channel

You can select a channel by using the number buttons or

[

SKIP/CH.

L].

Notes for using the number buttons:

• When selecting cable channels which are higher than 99, enter

channel numbers as a three-digit number.

(for example: 117, press [1], [1], [7])

• You must precede single-digit channel numbers with a zero. (for

example: 02, 03, 04 and so on)

• If the clock is not set, the CLOCK SET screen appears when you

press [MENU]. In this case, go to step 2.

CLEAR/

C. RESET

Preparation for Use

Hint

• Repeat these steps only if either there was a power failure or this unit

has been unplugged for more than 30 seconds.

Please wait for a few minutes.

After scanning...

• The tuner stops on the lowest memorized channel.

• You can select only the channels memorized in this unit by using

[SKIP/CH. G///K, H//L] (or [CHANNEL K///L]).

• If “AUTO SET UP” appears on the TV screen again, check the cable con-

nections. Then, press [B] once again.

Yes Press [MENU] to exit.

• Refer to “Hint for Cable Box or Satellite Box” section on page 6.

Do you connect the cable from the cable box or the satellite box to the

unit’s ANT-IN jack?

Hint

• To go back one step, press [s] (during steps 2 to 7).

• Your clock setting will be lost if either there is a power failure or this

unit has been unplugged for more than 30 seconds.

• If the clock is not set, the “CLOCK SET” screen appears when you

press [MENU]. In this case, press [MENU] again.

LANGUAGE SELECT

B ENGLISH [ON]

FRANCAIS

ESPAÑOL

CH 01

AUTO SET UP

- M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

B CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

CHANNEL SET UP

AUTO SET UP

B MANUAL SET UP

MANUAL SET UP

CHANNEL 30 (CATV)

ADD

MANUAL SET UP

CHANNEL 30 (CATV)

DELETE

- M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT

CLOCK SET

MONTH DAY YEAR

1 0 / – – – – – –

HOUR MINUTE AM/PM

– – : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 2 0 0 7

HOUR MINUTE AM/PM

– – : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : 4 0 – –

Press [MENU] and select “CLOCK SET”.

Then press [B] to go to next step.

Select the current month.

Then press [B] to go to next step.

Select the current day.

Then press [B] to go to next step.

Select the current year.

Then press [B] to go to next step.

Select the current hour.

Then press [B] to go to next step.

Select the current minute.

Then press [B] to go to next step.

Select “AM” or “PM”.

To exit the CLOCK SET screen

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : 4 0 P M AM

B PM

YES

Turn on the Unit for the First Time

VCR

Clock Setup

VCR

Operations described in this manual are

mainly based on the remote control.

Hint

• If you accidentally select Spanish or French and need English: Press

[MENU] and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B]

and select ENGLISH. Finally, press [CLEAR/C.RESET].

• To add or delete channels in this unit, [SKIP/CH. G/K, H/L] button

works on the channel number memorized in this unit, [K/L] works on

all.

To Add or Delete Channels

VCR

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 – – – –

HOUR MINUTE AM/PM

– – : – – – –

E8C1UCD_EN.indd 8E8C1UCD_EN.indd 8 2007/04/03 9:48:552007/04/03 9:48:55

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Philco CDV210HH8 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info