Gasconnection RC 1/2˝ (ISO 7/1-RC 1/2)
Please note:
The type of gas and the country for which the appliance has been designed are
indicated on the ratings plate.
The gas connection must comply with national and local regulations.
Amongst other things these regulations instruct that:
– only approved materials are to be used;
– only a completely metal hose may be used behind a built-in oven and beneath
the hob.
■ We recommend that the hob be connected by means of a fixed pipe.
Connection using a specially designed safety hose is also permitted. In all
cases the connection tap for the appliance must be positioned such that it is
easily accessible, in an adjacent kitchen cupboard, for example.
■ The safety hose must not get kinks in it or get trapped and must not come
into contact with moving parts of the kitchen furniture.
■ Before using the appliance for the first time check the connections using
water and washing-up liquid to ensure that there are no gas leaks.
54 55
installation instructions
General
The fitting of the appliance should only be carried out by a registered Corgi
gas fitter.
Please note:
■ This appliance is not connected to a flue duct. Take care to ensure that there
is sufficient ventilation.
■ Do not install a hob next to a high cupboard or wall made of flammable
material. (If there is no alternative, ensure that there is a minimal distance of
100 mm between the outer edge of the hob and the wall in question.
Also ensure that there is a minimum distance of 650 mm between the hob
and any overhead extractor fan which may be installed.)
Electrical connection (solely for appliances with a
spark switch)
Electrical connection: 230 V - 50 Hz.
This appliance complies the regulations concerning electromagnetic
compatibility in directive 89/336/EEC.
■ The electrical connection must comply with national and local regulations.
■ Wall socket and plug must be accessible at all times.
■ If you want to make a fixed connection, ensure that a multi-pole switch with a
distance between contacts of 3 mm is installed in the supply cable.
Please note:
■ This appliance must be earthed.
■ If the connection cable becomes damaged, it should be replaced by the
manufacturer’s service department or by a person with equivalent
qualifications, in order to prevent dangerous situations from arising.
