618143
31
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
Reference
Operations
RQT9785
31
To reduce the clear-mode dialog effect
When the dialog does not sound natural while the
volume is set low, it is possible to reduce the
dialog enhancing effect as follows:
While pressing and holding [SOUND] on the
remote control, press and hold [s VOL] on the
main unit for more than 4 sec.
All the indicators will blink once when the clear-mode
dialog effect is reduced.
Even if clear-mode dialog effect is reduced, dialog effect
level is still adjustable.
To reset the setting, return to the factory preset. (> right)
To turn off VIERA Link “HDAVI Control”
When “HDAVI Control” compatible equipment
does not work well with this system, for example,
it is possible to turn off this function as follows:
When VIERA Link is turned off, the ARC
function is not available. Be sure to connect the
optical digital audio cable. (> 22)
1 While pressing and holding [MUTE] on the
remote control, press and hold [s VOL] on
the main unit for more than 4 sec.
2 After the setting has changed, turn off all the
connected devices and then turn them on again.
All the indicators will blink once when VIERA Link “HDAVI
Control” is turned off.
To reset the setting, return to the factory preset. (> right)
To turn off the volume limitation
If a state of the lowered volume disturbs you
every time the main unit turns on, for example, it
is possible to turn off this function as follows:
While pressing and holding [MUTE] on the
remote control, press and hold [VOL r] on the
main unit for more than 4 sec.
All the indicators will blink once when the volume limitation
is turned off.
To reset the setting, return to the factory preset. (> right)
Reference
Troubleshooting
Before requesting service, make the following
checks. If you are in doubt about some of the
check points, or if the solutions indicated in the
following guide do not solve the problem, consult
your dealer for instructions.
No power.
Insert the AC mains lead securely. (> 24)
After turning the main unit on, if the indicators
blink and the main unit immediately turns off,
unplug the AC mains lead and consult your
dealer.
The remote control does not work properly.
The battery is depleted. Replace it with a new
one. (> 8)
It is possible that the insulation sheet has not
been removed. Remove the insulation sheet.
(> 8)
It may be necessary to set the code of the
remote control again after changing the battery
of the remote control. (> 30)
Use the remote control within the correct
operation range. (> 8)
The “TV” indicator blinks.
Remove the AC mains lead and consult your
dealer. If there are any other indicators blinking,
be sure to inform your dealer about the blinking
indicators.
To return to the factory preset.
While the main unit is on, press [Í/I] on the main
unit for more than 4 sec.
(All the indicators will blink twice when this
system is reset.)
If this system does not operate as expected,
returning the settings to the factory preset
may solve the problem.
The remote control code will return to “1” when
this system is returned to the factory preset. To
change the remote control code, refer to page
30.
General operation
SC-HTB570_RQT9785-B_mst.book 31 ページ 2013年1月10日 木曜日 午後2時56分
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SC-HTB570 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SC-HTB570 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic SC-HTB570

Panasonic SC-HTB570 Gebruiksaanwijzing - Nederlands - 52 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Nederlands - 116 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Deutsch - 116 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Deutsch - 52 pagina's

Panasonic SC-HTB570 Snelstart handleiding - English - 2 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Français, Italiano - 116 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Espanõl - 40 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Espanõl - 116 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Espanõl - 52 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Polski - 116 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Dansk - 52 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Dansk, Svenska - 116 pagina's

Panasonic SC-HTB570 Gebruiksaanwijzing - Suomi - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info