502461
17
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
ENGLISH
RQTV0247
17
Before playback
Speaker output and level
Adjust the level of the speakers so they are the same apparent level as the front speakers from the seating area.
Speaker level is adjusted during auto speaker setup. Do the following only if you find the level unsatisfactory.
To turn on SPEAKERS A.
Press
1
The unit does not output the test signal if only SPEAKERS B is
on.
If you have bi-wired your front speakers ( page
13), make sure you have selected “YES” for the
“LR BI-WIRE setting” ( page 27).
Press or
Press to output the test signal.
The signal is output from each speaker in order for
about two seconds each:
2
LCRRSSBRSBLLSSUBW
or LCRRSSB
1
LSSUBW
1
If you connect one surround back speaker only (the left
surround back speaker)
Set speakers volume to the level you would normally use.
Press
Volume range:
-- dB (minimum), -79 dB to 0 dB (maximum)
3
Press to select the speaker channel to adjust.
Press to adjust the level
to the same apparent level as the
front speakers.
Repeat steps 4 and 5 for each speaker channel.
Adjustment range:
-20 dB to +10 dB (Factory setting: 0 dB )
For the subwoofer (SUBW)
MIN (minimum) 1 to 29 MAX (maximum)
(Factory setting: 20 )
The test signal is output only from the speaker you are adjusting in
steps 4 and 5. Test signal for connected speakers resumes after 2
seconds.
4
5
Press to stop the test signal.
6
Speaker abbreviations
L: Front left C: Center
R: Front right RS: Surround right
LS: Surround left SBR: Surround back right
SBL: Surround back left SB: Surround back (If you connect
one surround back speaker)
SUBW: Subwoofer
SPEAKERS A are on SPEAKERS A and B are on
SPEAKERS
A
A
SPEAKERS
A B
SPEAKERS
SPEAKERS
A
SPEAKERS
B
A B
SPEAKERS
BI-WIRE
TEST
AUTO
VOLUME
LEVEL
TEST
AUTO
or
Automatic speaker detection
Automatic speaker detection is performed during auto speaker setup. Do the following only if you want to check speakers’ status, and
not other settings.
Turn on the unit.
Press
The standby indicator goes off when you turn on the unit.
Start automatic speaker detection.
Press at the same time.
1
2
SPEAKERS
A B
AUTO DETECTOR
These settings are saved even if you turn the unit off.
Refer to page 14 for further notes and page 16 for error message explanations. (“WARNING” may appears on the display during
the detection here.)
Make sure your speaker settings match your connections ( pages 13, and 14 to 16). There will be no output from a speaker if
it is set as NO or NONE ( page 27).
(Checks each speaker’s
connection status)
(Shows the number of detected
speakers, excluding the subwoofer)
(Shows connected speakers)
(Automatic speaker detection ends.
The previous display reappears)
SA-XR59 (RQTV0247-B).indb 17 6/5/2007 9:10:56 AM
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Panasonic-SA-XR59

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SA-XR59 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SA-XR59 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic SA-XR59

Panasonic SA-XR59 Gebruiksaanwijzing - Nederlands - 120 pagina's

Panasonic SA-XR59 Gebruiksaanwijzing - Deutsch, Français, Italiano - 120 pagina's

Panasonic SA-XR59 Gebruiksaanwijzing - Dansk, Svenska - 120 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info