532618
105
Verklein
Vergroot
Pagina terug
1/186
Pagina verder
[PROJECTOR SETUP] menu
ENGLISH - 105
Settings
times. Next, four lamps turn on eight hours after the
specied time and thereafter three lamps switch
again after the specied time.
z
The operating time will be the local time. (
page 113)
z
Use the number (<0> to <9>) buttons on the remote
control to directly enter the time.
[BRIGHTNESS CONTROL]
The projector is equipped with a luminance sensor to
measure brightness and color of the lamp, and functions
to correct brightness and color of the screen resulting
from changes in brightness and color of the lamp.
By using this function and displaying multiple screens
using multiple projectors, you can reduce changes in
overall brightness and color of the multiple screens
due to lamp degradation and suppress variation in
brightness and color to preserve uniformity.
1) Press

to select [BRIGHTNESS
CONTROL].
2) Press the <ENTER> button.
z
The [BRIGHTNESS CONTROL] screen is
displayed.
3) Press

to select an item.
To set [BRIGHTNESS CONTROL
GAIN]
Adjust brightness when using multiple projectors to
display on multiple screens.
4) Select [BRIGHTNESS CONTROL GAIN]
in Step 3).
5) Press
󱚣󱚤
to adjust.
Operation
Adjustment
Range
Brightness
Maximum
brightness
correction
Press
󱚤
.
The screen
becomes
brighter.
The
maximum
correction
amount
decreases.
Maximum
value
100%
Press
󱚣
.
The screen
becomes
darker.
The
maximum
correction
amount
increases.
Minimum
value
20%
Note
z
When one projector is used, the maximum
correction amount is the value obtained when
the [BRIGHTNESS CONTROL GAIN] value is
subtracted from 100%. When [BRIGHTNESS
CONTROL GAIN] is 100%, the maximum correction
amount is 0% and brightness cannot be corrected
due to luminance controls.
z
Luminance will be unsteady for eight minutes after
a lamp is turned on. Adjust after eight minutes have
elapsed from the time that the power is switched
on.
z
[BRIGHTNESS CONTROL GAIN] adjustments are
reected to all image signals, internal test patterns,
and on-screen menus.
z
[BRIGHTNESS CONTROL GAIN] is enabled even
if [BRIGHTNESS CONTROL SETUP] is [OFF].
To set [BRIGHTNESS CONTROL
SETUP]
Set the operation of luminance control.
4) Select [BRIGHTNESS CONTROL
SETUP] in Step 3).
5) Press the <ENTER> button.
z
The [BRIGHTNESS CONTROL SETUP]
screen is displayed.
6) Press

to select [MODE].
7) Press
󱚣󱚤
to switch [MODE].
z
The setting will change as follows each time
you press the button.
[OFF] [AUTO] [PC]
[OFF]
No correction performed by the
luminance sensor.
[AUTO]
Correction is performed by the
luminance sensor.
Automatically corrects screen
brightness when lamp brightness
changes.
[PC]
Use a computer and the dedicated
“Multi Projector Monitoring & Control
Software”
*1
to connect nine or more
projectors.
*1: “Multi Projector Monitoring & Control Software” is included
in the attached CD-ROM.
105

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic PT-DS20KU bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic PT-DS20KU in de taal/talen: Engels als bijlage per email.

De handleiding is 18,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic PT-DS20KU

Panasonic PT-DS20KU Gebruiksaanwijzing - Deutsch - 190 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info