PENTAGRAM Cerberus P6360 / P6361 / P6362 / P6363 / P6369
Security Mode - select the wireless security settings as the settings used by the access point
provider.
Open scan/Close scan - Click Open scan to search for nearby wireless networks and select a
service provider's network. If the wireless network is secured, select the type of security in the
position Security Mode, then select the algorithm used to secure your network and enter the
key / password used by the service provider.
Click Apply button, to apply and save your changes.
Click Cancel button, to cancel your changes.
NOTE: Feature is available only for P6362 and P6363 models.
Kontrola przepustowości
Traffic control is used to limit communication speed in the LAN and WAN. Up to 20 entries can
be supported with the capability for at most 254 PCs' speed control, including for IP address
range configuration.
Włącz kontrolę przepustowości - to enable or disable the internal IP bandwidth control. The
default is disabled.
Adres IP – enter the IP address range under control.
Wysyłanie/pobieranie – to specify the traffic heading way for the selected IP addresses:
uploading or downloading.
Zakres przepustowości - to specify the uploading/downloading Min. /Max. Traffic speed (KB/s),
which can not exceed the WAN speed.
Włącz – to enable the current editing rule. If not, the rule will be disabled.
Dodaj do listy – after edit the rule, click this button to add the current rule to rule list.
Click OK button, to apply and save your changes.
Click Anuluj button, to cancel your changes.
23
