37
Troubleshooting table/Specifications
Troubleshooting table
Please check the following list before requesting service.
In menu, the TUNING
option cannot be selected.
The unit is set to AV mode. Press 1 on the remote
control.
13
Symptom
Possible solution
Page
No picture, no sound
Switch on the set.
Check that the mains power outlet is properly connected.
Select appropriate input mode.
10
11, 27, 33~35
No reception Have you tuned in the TV stations?
Press 1 on the remote control.
Connect the antenna.
Make sure the set is ON and not in Standby mode
10
10
The TV switches off with
missing antenna input signal
This is normal.
15 minutes after the antenna signal has disappeared,
the set will change to standby mode.
17
Wrong Colours
Colour and Brightness errors can occur when the
viewing angle / ambient air temperature (see technical
specifications) are exceeded.
Specifications
Model TV-32082 TV-37094
System PAL B/G, D/K, I/I, SECAM L Colour System
Frequency Range PAL: 2-12, X, Y, Z, S1-S41, 21-69
SECAM: FB-FC, F1-F6, B-Q, 21-69
Power Supply AC 230V, 50Hz
Power Consumption: Operation: approx. 170W approx. 175W
Stand by: approx. 1W
LCD 31.5” TYPE (80.04 cm visible) 37.02” TYPE (94.03 cm visible)
TFT low-glass Active Matrix Colour LCD, 1366 x 768 Pixel
HDMI input HDMI compliant (type A connector), HDCP compliant
Suggested scan rates: PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
HDMI Audio: 2-channel PCM, 32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
Output Power 10W (MAX) x 2
Surrounding temperature Operation: 5°C ~ 40°C
Storage: –20°C ~ 60°C
Operating Humidity Less than 80%RH
Dimensions
82.2(W) x 60.4(H) x 33.3(D) cm 94.9(W) x 69.5(H) x 33.3(D) cm
Weight (w/o Accessories) approx. 19 kg approx. 24 kg
Accessories 2 batteries (AA/R6/UM-3)
Remote control unit
AC cord
Weight and dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
3Z70146B_En_P33-BACK 10/6/06, 1:40 PM37