WWW.ONEFORALL.COM 9
Setting Up Your Other Devices
To set up the ONE FOR ALL 5 for your other devices:
Find the code for your device in the Set-Up
Code section (starting on page 13). Codes are
listed by device type and brand name. The most
popular code is listed first. Make sure your
device is switched on (not in standby).
Press the device key on the ONE FOR ALL 5 for the
device you wish to control. Devices can be found under
the following key:
Device Device Key
Television TV key
Video Recorder VCR key
Satellite Receiver / Cable Converter SAT key
CD Player / Mini Disk Player CD key
Audio Amplifier AUD key
Tuner AUD key
Miscellaneous Audio AUD key
Press and hold down the MAGIC key
until the device key blinks twice. (The
device key will blink once and then twice.)
Enter your four-digit device code using
the number keys. The device key will
blink twice.
Now, aim the ONE FOR ALL 5 at your
device and press POWER. If your device
switches off, the ONE FOR ALL 5 is ready
to operate your device.
Write your code in the four boxes
provided in the battery compartment
and on page 12 for easy future reference.
Installation
Important notes:
- If your device’s original remote control does not have
a power key, press PLAY instead of POWER when
setting up your device.
- Remember to press the correct device key before
operating your device. Only one device (CD, amplifier,
TV, etc.) can be assigned to a device key. If your original
remote operates more than one device (for example, a
receiver and CD player in one remote), you need to set
up each device separately.
- If your device does not respond, follow steps 1 through 5
with each code listed for your brand. If none of the
codes listed for your brand operate your device, or if
your brand is not listed at all, try the search method
described on page 10.
1
