6
Setting Up the BIG EASY
Using the AUX Key
The AUX key on your BIG EASY can be used to control a
second Television, Video Recorder or Satellite Receiver.
To set up the AUX key to control a second TV:
Press and hold the MAGIC key until
the red light blinks twice (the light will
blink once then twice).
Press 9 9 2 TV AUX.
Find your Television code in the Set-Up
Code section (starting on page 19). Codes
are listed by brand name. The most
popular code is listed first. Make sure
your Television is switched on.
Press and release your BIG EASY’s AUX
key, then press and hold the MAGIC
key until the BIG EASY’s red light blinks
twice.
Enter your three-digit TV code using
the number keys. The red light will blink
twice.
Now, aim your BIG EASY at your
Television and press POWER.
If your Television switches off, your BIG
EASY is ready to run your Television.
When you want to control your second
TV, press AUX first.
1
2
3
4
5
6
Important notes:
- To set up your Video Recorder or Satellite, follow the same
instructions above, only press the VCR or SAT key during
step 2.
- To set up your Cable Box, follow the instructions above
only press the SAT key during step 2.
- If your Video’s original remote control does not have a
power key, press PLAY instead of POWER when searching
for your code.
- If your device does not respond, follow steps 3 - 6 with
each code listed for your brand. If none of the codes listed
for your brand operate your Television, Video Recorder or
Satellite Receiver, then try the search method described on
page 14, even if your brand is not listed at all.
