Level one function Level two function Level three function Summary of setting Default setting Page
B. User Settings 2.Fax Settings 03.# of Rings Number of rings before your machine answers. Two times 4.4
04.Redial Number of times and interval for automatic fax redialling. Two times
4.5
Three minute
05.Dialling Pause Dialling pause length. Two times 4.5
06.Memory Tx On/Off setting for Memory transmission. On 4.2
07.Quick Memory Tx On/Off setting for Quick Memory transmission. On 4.2
08.TTI Tx On/Off setting for sending your TTI. On 4.2
09.ECM Mode On/Off setting for ECM mode. On 4.1
10.Block Junk Fax Reject the fax reception from unauthorized incoming faxes. Off 3.54
11.Security Rx Keep all received fax messages in memory and after print them. Off 3.50
12.PIN Mode Prevent unauthorized long-distance calls. Off 3.52
13.Passcode Enter passcode for limiting polling access. — 3.16
14.Rotate Rx
On/Off setting for Rotate Rx. Off 4.4
(for OM 9816 only)
for OM 9812
14.Audible alarm When your machine receives a fax message, it will sound the
Off 3.24
for OM 9816
15.Audible alarm alarm tone.
3.Copy Settings 01.Scan Parameters You can set the following settings for copying.
• Primary document type Text 4.6
• Primary contrast mode Normal
02. Print parameter You can set the margin for copying. 24 mm 4.6
03.Auto Reset Time Set the time (minutes) of resetting the copy parameters. 3 minutes 4.7
04.Copy Auto Set the default setting to “Auto” for one of the following:
Paper size 4.7
• Paper size • Reduce/Enlarge ratio • Document size
05.Copy Protect On/Off setting for Copy protection. Off 2.18
06.Sort Copy On/Off setting for Sorting copy On 2.16
07.Nega/Posi On/Off setting to reverse copy of black and white areas. Off 2.16, 4.7
08.Combine
On/Off setting to combine. Off 2.17, 4.7
(for OM 9816 only)
4.Printer Settings 01.TCP/IP*
3
Enter the IP Address, Subnet mask and Gate way address. — —
5.Scanner Settings*
4
01.Scan Parameter Enter the scanning parameters. — —
02.Scan Size Set the scanning size. — —
03.Auto Reset Set the time (minutes) resetting the scan parameters. — —
1.15
Getting started
*3: This option appears only if the optional NIC (network interface card) has been installed.
*4: Refer to the Driver’s manual included in the Printer driver CD-ROM.
